Examples of 'no-load' in a sentence
Meaning of "no-load"
No-load (noun): a type of mutual fund where there are no sales charges or commissions, making it a cost-effective investment option for investors
Show more definitions
- Sold directly to a customer without a sales commission.
- Not supplying power; open-circuited.
- A financial instrument that is sold directly to a customer without a sales commission.
How to use "no-load" in a sentence
Basic
Advanced
no-load
Adjusting no-load speed and revolution angle.
Never operate the appliance in a no-load condition.
The no-load current is speed and temperature depend t.
Do not operate the tool at no-load unnecessarily.
Allow a severely overheated machine to run on at no-load.
Let engine run at no-load for several minutes to.
No-load power consumption and average active efficiency.
Require the use of reduced no-load voltage.
Proper no-load but low under load voltage.
Let the engine run at no-load for several.
No-load voltage measurement as a SoC indicator is also known.
Minimum energy losses in no-load operation.
Shows that the no-load voltage of the equipment is controlled.
This series is are offered to all investors on a no-load basis.
Let the engine run at no-load for a few minutes.
See also
The easiest way to do this is by setting up a no-load fund.
Determine the no-load voltage of the battery or voltage regulator.
Controlled conventional no-load direct voltage.
No-load breakable electrical contact especially for connected appliances or vehicles.
Conveyors should generally be launched under no-load conditions.
Let engine run at no-load for several minutes to stabilize the.
The numerical model is satisfactory for the no-load tests.
The method can achieve the no-load angular displacement periodically.
The saw disc must be suitable for the no-load speed.
Allow engine to run at no-load for several minutes to stabilize internal temperatures.
The saw blade must be suitable for the no-load speed.
The no-load speed of the electric motor varies by model and specification.
Rotation of the cam is therefore pursued and a no-load discharge is obtained.
Greater than the no-load speed of the tool specifi ed on the nameplate.
High efficiency with a minimal conversion loss and a low no-load.
A second problem is to determine when the no-load protection should begin.
Avoid any no-load operation and do not handle it with hands wet.
The battery 5 is considered to comprise a no-load voltage v bat and a series resistance r s.
In no-load static conditions the device shall meet the following requirements.
Do not hesitate to make a no-load draw to test the tightness of the circuit.
At no-load conditions, the frequency is reduced further by a skipping number of switching cycles.
It never sees the sudden no-load condition when operating with load.
If a universal joint is used, be sure not to operate the unit in a no-load condition.
The dependence of no-load voltage and short-circuit current on temperature is determined.
Be sure to check the battery level while the tool is in a no-load state.
Motor will spin at no-load until timeout occurs and motor is reversed.
It means that the safe guard mechanism against no-load striking is working.
They save energy in no-load conditions and operate efficiently at partial loads.
The electrical power required by the cooling system for no-load operation.
Let engine run at no-load for several minutes to stabilize the internaltemperaturesof engineandgenerator.
Only use tools that are suited to the no-load speed of your machine.
The no-load condition power consumption shall not exceed the following limits.
Loaded operation, but it may rotate counterclockwise during the no-load operation.
Allow the engine to run for 2 minutes at no-load to stabilize the internal temperatures.
This waiting period enables the battery to stabilize its no-load voltage.
