Examples of 'nozzle cover' in a sentence
Meaning of "nozzle cover"
Nozzle cover: A nozzle cover is a protective cap or covering that is used to shield a nozzle from damage, dirt, or contamination when it is not in use.
How to use "nozzle cover" in a sentence
Basic
Advanced
nozzle cover
Use a screwdriver to remove the nozzle cover.
Replace the nozzle cover as shown.
The spray is adjusted by turning the nozzle cover.
Push nozzle cover away from the gun.
Flip cleaner back over and lift nozzle cover off.
The nozzle cover.
Turn power nozzle over to top and open hinged nozzle cover to access brushroll.
Pull the nozzle cover toward the gun to engage in high pressure mode.
The invention can include a folding nozzle cover to avoid user contact and dripping.
Remove the four screws on the upper housing that secure the nozzle cover.
Replace the power nozzle cover back onto the unit.
Remove the three screws on the upper housing that secure the nozzle cover.
Remove the frothing nozzle cover and frothing tip and clean with a needle or toothpick.
To clean the mini turbine nozzle, remove the nozzle cover.
The nozzle cover is also movable along the longitudinal axis relative to the nozzle cap.
See also
For detergent spray push nozzle cover away from gun handle B.
The nozzle cover 106 is formed of transparent or translucent material.
For high pressure spray pull nozzle cover toward the gun handle A.
Turbomachine nozzle cover provided with triangular patterns having pairs of vertices for reducing jet noise.
When low pressure is required, grasp and slide the nozzle cover away from the gun.
Here, the nozzle cover consists of two portions.
With such an operation, an outer peripheral surface of nozzle cover 840 is cleaned.
In one embodiment, the nozzle cover is movable in response to a patient 's breathing.
A fluid inlet 35 is preferably positioned at the opposite end of the nozzle cover 32.
In another embodiment, the nozzle cover is movable by moving a mechanical actuator by hand.
This causes part of the nozzle body 70 to be inserted into the nozzle cover 50.
Use a phillips screwdriver to remove the nozzle cover screw located behind the caster Diagram 2.
The nozzle cover 50 has a cylindrical shape with its one end closed.
Figure 2 depicts dispensing pump 10 of the invention having exit nozzle cover 16 in the open position.
Twist nozzle cover to adjust spray pattern from jet to wide fan spray Figure 14.
Figure 5 is a cross-sectional view of the nozzle cover of Figure 4.
Insert the nozzle cover ( E ) pushing it upwards.
Figure 28 is a sectional view of the nozzle and nozzle cover of Figure 23.
A nozzle cover 30 is mounted on the gas injection nozzle 26 to surround it.
As shown, the diverter is attached to a fixed portion 632A of the nozzle cover.
Nozzle cover 70 has an annular face 72 thereon which confronts annular face 58 on the nozzle cap.
For 60 Fan-Type Pattern-Turn nozzle cover fully counterclockwise D.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Nozzle
Show more
Replace nozzle and bring in tight to body
Attach the textile turbo nozzle to tubes
Each nozzle can be individually closed or calibrated
