Examples of 'nozzle tip' in a sentence
Meaning of "nozzle tip"
nozzle tip: The end or opening of a nozzle, which is a device designed to control the direction or flow of a liquid or gas, commonly used in engineering and technology
How to use "nozzle tip" in a sentence
Basic
Advanced
nozzle tip
Always use the nozzle tip guard.
Nozzle tip is not cut adequately.
Avoid applying excessive nozzle tip pressure.
Place the nozzle tip between two teeth at.
Discharge of individual droplets from the nozzle tip.
Do not spray without nozzle tip guard in place.
Nozzle tip spray rod.
A hole at the end of the nozzle tip is optional.
Wipe off nozzle tip using a rag moistened with thinner.
Inner recycle gas nozzle tip.
Fan nozzle tip.
Outer recycle gas nozzle tip.
Place the nozzle tip between two teeth at your gum line.
Material reservoir between screw and nozzle tip is under pressure.
The nozzle tip can if desired be threaded onto a separate nozzle housing.
See also
Do not exert excessive pressure on the nozzle tip of the nozzle.
NEVER dip the nozzle tip into any type of material.
At the same time it was noticed that clogging near the nozzle tip was reduced.
Only use a Nozzle Tip specified by the manufacturer.
The extruder forces a melt through the nozzle tip to cause atomization.
In prior art devices a solid deposited matter frequently occurs at the nozzle tip.
As a stopping face the sealing part of the nozzle tip is provided with a collar.
Extruder is clogged or jammed and will no longer extrude plastic from the nozzle tip.
The nozzle tip was set 1 inch above the powder bed.
Various caps have been used to block the opened nozzle tip with limited success.
Direct nozzle tip at any clean / dry surface you wish to bond.
The fuel feeding conduit introducing fuel into the nozzle tip is not shown.
In this way, the nozzle tip may contribute to the container footprint.
Always relieve pressure before removing the Nozzle Tip to clean.
In another aspect, a nozzle tip for a liquid spray gun is described herein.
Advantageously, the steam output nozzle tip is bent down.
The nozzle tip must be submerged in the milk by 1 cm for perfect results.
Always set on a flat, level surface so the nozzle tip is directed upwards.
Push the nozzle tip to the front to switch over to low-pressure operation.
Moreover, it shall be avoided that abrasive particles cause erosion of the nozzle tip.
The nozzle tip may be removably attached to the body and / or the air cap.
At least one passageway 4 passes through the length of nozzle tip or front section 2.
In the case where the nozzle tip clogs while spraying, follow the manufacturer 's instructions.
This method, however, only cleans the injector nozzle tip and the filter basket.
Thus, a typical nozzle tip is rated to provide a particular spray width under proper spraying conditions.
Make sure you hear the " click " when inserting the nozzle tip into the quick connection.
With nozzle tip facing away from tool, screw nozzle cap back onto sausage holder.
During a project, periodically wipe the nozzle tip with a cloth to remove any dried paint.
FIG . 7 illustrates a cross sectional view of different embodiments of the atomizer nozzle tip.
Always set on a flat, level surface with nozzle tip directed upwards, away from supporting surface.
The frothing wand features a removable black cover and a removable metal nozzle tip for easy clean-up.
Figure 4A is a bottom view of the nozzle tip region showing specifically the circular exit orifice.
A nozzle according to claim 1, wherein said nozzle tip comprises.
Turn nozzle tip to low-pressure position.
FIG . 6 shows a slightly different drawing of a nozzle tip in accordance with the present invention.
You'll also be interested in:
Examples of using Tip
Show more
People used to tip big in those days
Tip up and hold to tune more quickly
Just do not tip the table over
Examples of using Nozzle
Show more
Replace nozzle and bring in tight to body
Attach the textile turbo nozzle to tubes
Each nozzle can be individually closed or calibrated
