Examples of 'nut clockwise' in a sentence
Meaning of "nut clockwise"
nut clockwise - This phrase is used to describe the direction in which to turn a nut to tighten it, which is to the right or in the direction that clock hands move
How to use "nut clockwise" in a sentence
Basic
Advanced
nut clockwise
Turn the blade nut clockwise to remove.
Press in the spindle lock button while turning flange nut clockwise.
Turn the locking nut clockwise to lock.
Turn the nut clockwise to release the screw adjuster of the foot.
Turn the outside axle nut clockwise to tighten.
Move to the required angle and lock by turning the locking nut clockwise.
Turn the locking nut clockwise to secure.
Remove the gas supply hose from the cylinder by turning the fuel connector nut clockwise.
Turn this nut clockwise and tighten firmly.
Press in while turning the locking nut clockwise and tighten.
Turn the large nut clockwise to tighten the connector.
Mount the new filter cartridge centered and screw the nut clockwise to the stop.
Turn the black nut clockwise until it stops.
Insert the bottom into the condensate drain pan and tighten the coupling nut clockwise.
Turn the locking nut clockwise until it is locked.
See also
Lock the Auger in place with the Securing Nut by turning nut clockwise.
Always rotate the vise nut clockwise until the.
To tighten, press in the spindle lock button while turning disc nut clockwise.
Turn the coupling nut clockwise and tighten to a full stop.
To decrease clearance, turn the adjusting nut clockwise.
Turn the coupling nut clockwise to tighten to a full solid stop.
For deeper driving of staples, turn the nut clockwise.
Tightening the clutch nut clockwise will control the rate of descent.
To remove the upper spray arm, unscrew the nut clockwise.
Turn the clamp nut clockwise to secure the handle in the desired.
Push feet into base plate and tighten hand nut clockwise until feet are secure.
Turn the locking nut clockwise with the head shell firmly held horizontally.
To remove the upper spray arm, turn the nut clockwise and remove the arm.
Turn the nut clockwise and tighten firmly . Figure 2.
After adjustment, securely tighten the hex bolt and then the clamping nut clockwise.
Turn the large coupling nut clockwise by hand and tighten to a full stop.
If the fridge compartment door is lower, Turn the adjusting nut clockwise.
Turn the covering nut clockwise with your HANDS until it is fixed.
If chain does slip re-tighten spring nut by turing nut clockwise 1/2 turn.
Hand-tighten the coupling nut clockwise until it comes to a full stop.
Open the lever ; turn the tension adjusting nut clockwise a quarter turn ; then try again.
Tighten the nut clockwise to fix the hook securely . Fig . 4.
To remove the upper spray arm, screw off the nut clockwise then remove the arm.
After adjustment, turn the locking nut clockwise to help prevent rotation of the barrel adjuster.
To increase the preload, tighten the hex nut clockwise in ¼ turn intervals.
Turn the stem 's lock nut clockwise until it loosens.
To lower the foot further, tighten the hex nut clockwise with a 12 mm wrench.
Hold whisk in place and loosen nut clockwise using open ended wrench size 8.
N Loosen and unscrew the nut clockwise left-hand thread.
C 2 Screw the brush head nut clockwise until it is firmly tightened.
Tighten nut ( C ) with wrench ( D ) by turning nut clockwise while holding arbor steady with other wrench B.
Screw the shaft end with welded nut clockwise into the socket ( 3 ) Fig . C.
You'll also be interested in:
Examples of using Clockwise
Show more
Turn the battery clockwise to lock it in place
Clockwise rotation increases the volume level
Turn the control clockwise to increase gain
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
