Examples of 'o-ring seal' in a sentence
Meaning of "o-ring seal"
An o-ring seal is a type of gasket used to prevent leakage in systems with moving or rotating parts. It is typically a ring-shaped component made of rubber or other materials that forms a seal between two surfaces
How to use "o-ring seal" in a sentence
Basic
Advanced
o-ring seal
Replace o-ring seal if there is visible damage.
Aluminium manifold mounting spacer o-ring seal.
Install new o-ring seal onto strain relief.
Blind lid in painted aluminum with silicone o-ring seal.
Need an O-Ring seal in a specific material.
The seal may be effected by a face sealed gasket or o-ring seal.
The o-ring seal with clean lubricating oil.
Lightly lubricate the o-ring seal in the sump with sili.
The continuous seal may be an O-ring seal.
The brass adapter has a double O-Ring seal and a hexagonal control on its surface.
Be careful to avoid losing the rubber O-ring seal.
The third o-ring seal is situated in a circular groove that extends around the hermetic bushing.
Be careful to avoid removing the rubber O-ring seal.
The O-ring seal of the gland nut is damaged.
The perforated plates are coupled to these sections by an O-ring seal.
See also
Inlet O-ring seal goes into the outer groove only.
The most likely cause of leaks is from the O-ring seal.
An adapter ring and an O-ring seal are arranged between said flanges.
Teflon tape may be used on connections that do not use an O-ring seal.
The seal may be an O-ring seal assembled with the cartridge.
For example, the sealing means are constituted by an O-ring seal or by a lip seal.
The seal may be an O-ring seal housed in an annular groove of the sleeve.
In one specific arrangement the sealing means may comprise an O-ring seal.
The O-ring seal maintains the fluid seal around the tube.
Inspect the cover to make sure that the O-ring seal is not visible.
Preferably, the O-ring seal member is seated within a collar fixed relative to the housing.
The end fitting may comprise a groove or recess for receiving an O-ring seal.
These struts maintain pressure by O-ring seal friction along interior strut cylinder walls.
The O-ring seal 5 also facilitates the clamping of the prisms without breaking the substrate.
Many existing ball valve designs use an O-ring seal as the primary valve stem seal.
This bearing surface can be situated between the chamber aperture and the O-ring seal.
There is a chevron-type seal or an O-ring seal between the filter element and the opening.
The outer peripheral edge of the base includes a circumferential groove which receives an O-ring seal.
Metric thread o-ring seal fittings.
The crankcase passage connector is then over-moulded directly on the contact and the O-ring seal.
An o-ring seal can be envisaged.
This style of fitting is also commonly called an O-ring seal ORS.
O-ring seal manual overide.
Be sure to keep the large o-ring seal.
O-ring seal 9 would occupy the position shown by the dotted line.
According to an embodiment, the sealing element is an o-ring seal.
O-ring seal 62 is effective to prevent the leakage of filtered fluid to the outside.
Inspect the items for wear or damage and replace the O-Ring seal 16.
The O-ring seal 7 originally consisted of viton.
The valve is equipped with a stainless steel single-piece control stem, with a double O-Ring seal.
European style O-ring seal clamp-in brass tire.
This was blamed on a failed O-ring seal.
An O-ring seal surrounds the bore in said cylinder ;.
The delivery piston 4 comprises an O-ring seal to ensure leaktightness.
Preferably, the second seal portion comprises an O-ring seal.
You'll also be interested in:
Examples of using O-ring
Show more
Install a new o-ring if necessary to stop leaks
Use silicone grease to lubricate the O-Ring
Lubricate o-ring with a silicone based lubricant
Examples of using Seal
Show more
And in so doing seal a bond of enduring friendship between us
Please verify that the seal is unbroken
Seal tightly and allow to stand overnight
