Examples of 'o-xylene' in a sentence
Meaning of "o-xylene"
O-xylene is a chemical noun referring to a toxic aromatic hydrocarbon used in various industrial applications
How to use "o-xylene" in a sentence
Basic
Advanced
o-xylene
The excess of o-xylene was removed by steam distillation.
It can also be produced by ammoxidation of o-xylene.
This concentration of o-xylene is outside the explosive limit.
The product is an overbased calcium hydrogenated palmate in o-xylene.
The o-xylene was removed in vacuum and the resulting polymer was grinded into a powder.
Phthalic anhydride and the hydrocarbon is naphthalene or o-xylene.
The o-xylene was removed by distillation.
The product is an overbased calcium coconut acid in o-xylene.
The o-xylene was removed by distillation of the o-xylene / water azeotrope.
The reaction was carried out in either toluene or o-xylene at reflux.
The o-xylene isomer, which is normally undesirable, was converted into equilibrium xylene isomers.
The product obtained is an overbased calcium hydrogenated castor acid in o-xylene.
The o-xylene was then stripped at temperatures below 20°C to prevent aggregation of the particles.
The formaldehyde solvent water is removed by azeotropic distillation with the o-xylene.
The total amount of o-xylene introduced in the reactor was 13ml.
See also
The process of claim 1 wherein the selective oxidation is oxidation of o-xylene to phthalic anhydride.
Conversion of o-xylene is virtually complete, but selectivity to phthalic anhydride is well below 100 %.
The only commercial process currently used in the art uses o-xylene and butadiene as feedstock.
An aliquot injected into 3 ml of o-xylene at 95°C produced chemiluminescence which persisted for several hours.
A process as claimed in claim 2, wherein the crystallisation solvent is o-xylene.
The weight yield calculated on the o-xylene which has reacted is 97 %.
After three hours, the flask was evacuated to remove the o-xylene.
The calculated average partial pressures of o-xylene and chlorine are 13 mm and 25 mm mercury, respectively.
In qualitative terms, it is observed that exclusively o-xylene has formed.
Additionally, the swell ratio in stabilized o-xylene at 130°C was measured in the compression molded direction.
Of ketonic compound in o-xylene.
Aluminium ( III ) bis-triflimide was found to be an effective catalyst for the benzoylation of o-xylene.
Generally, the CYMEL 300 showed a significant solubility in the o-xylene as did the p-toluene sulfonic acid.
The organic step 1 solution is concentrated to 50 % by weight by vacuum distillation of o-xylene.
The nearly colorless material was cooled down and diluted with o-xylene to a 90 % solid content.
A process according to claim 28, wherein said organic solvent is o-xylene.
A resultant cake was washed with about 800 g of o-xylene and then dried.
The organic step 2 solution is concentrated to 45 % by weight by azeotropic distillation of o-xylene.
Process according to any one of Claims 1-10 in which o-xylene is used as solvent.
The combined aqueous phases were extracted with 20ml o-xylene.
The peroxide of di tert-butyl ( DTBP ) is used as initiator and o-xylene as solvent.
K094 Distillation bottoms from the production of phthalic anhydride from o-xylene.
The preferred organic solvent, however, is o-xylene.
K093 Distillation light ends from the production of phthalic anhydride from o-xylene.
