Examples of 'oil fill' in a sentence
Meaning of "oil fill"
The phrase 'oil fill' typically refers to the process of adding or replenishing oil in a machine, engine, or mechanical system that requires lubrication. It involves filling the designated oil reservoir or chamber to ensure smooth operation, reduce friction, and prevent damage. This phrase is commonly used in discussions or instructions related to maintenance, repair, or operation of vehicles, machinery, or industrial equipment
How to use "oil fill" in a sentence
Basic
Advanced
oil fill
Remove oil fill cap and dipstick.
Replace and tighten oil fill cap.
Oil fill hole but do not screw in.
Remove cap from oil fill opening.
Oil fill cap and level indicator.
Add oil at the oil fill shown.
The oil fill cap or oil drain plug.
Engine lubricant through oil fill hole.
Replace oil fill plug or dipstick.
Front and rear engine oil fill.
Clean the oil fill area of any debris.
Refer to engine manual for oil fill information.
Reinstall oil fill cap and oil dipstick.
Slowly unscrew and remove oil fill dipstick.
Removethe oil fill dipstickandwipeit clean.
See also
Replace and secure the oil fill cap.
Remove the oil fill plug from the.
Pour the oil out of the oil fill.
Reinstall oil fill dipstick and fully tighten.
Verify oil is at the point of overflowing at oil fill.
Replace the oil fill plug.
Install oil fill cap andfinger tighten securely.
Remove oil dipstick from oil fill spout.
Verify oil fill area is clean.
It is only necessary to use one oil fill point.
Remove the oil fill and drain plugs.
Place a funnel into the oil fill neck.
Replacethe oil fill cap andtighten.
Clean area around oil fill.
Remove oil fill cap and wipe dipstick clean.
Reinstall the oil fill plug.
Install oil fill cap and finger tighten securely.
Replace the oil fill cap.
Remove oil fill plug and oil level plug.
Fill to point of overflowing at oil fill cap with.
Tighten the oil fill cap securely to prevent leakage.
Install and tighten the oil fill plug.
Replace pump oil fill plug and tighten securely.
Slowly unscrew and remove oil fill cap.
Clean oil fill and filter areas of any debris.
Refill through oil fill hole.
Oil fill and adjacent area on air pump housing.
Models with oil fill cap.
Place engine level and clean around oil fill.
Fill to point of overflowing at oil fill cap or to FULLmark on dipstick.
Identification on the genset of the lubricating oil fill plug.
Slowly pour oil into oil fill hole using funnel.
The oil fill ports are located on both sides of the engine.
Install control panel and oil fill access covers.
Reinstall oil fill cap and tighten until fully seated.
