Examples of 'oil fill cap' in a sentence
Meaning of "oil fill cap"
Oil fill cap: A removable cap on a container or engine designed to provide access for adding oil
How to use "oil fill cap" in a sentence
Basic
Advanced
oil fill cap
Remove oil fill cap and dipstick.
Replace and tighten oil fill cap.
Oil fill cap and level indicator.
Replacethe oil fill cap andtighten.
Replace and secure the oil fill cap.
Reinstall oil fill cap and oil dipstick.
Fill to point of overflowing at oil fill cap with.
The oil fill cap or oil drain plug.
Replace the oil fill cap.
Install oil fill cap andfinger tighten securely.
Models with oil fill cap.
Remove oil fill cap and wipe dipstick clean.
Slowly unscrew and remove oil fill cap.
Install oil fill cap and finger tighten securely.
Replace and tighten the dipstick and oil fill cap.
See also
Fill to point of overflowing at oil fill cap or to FULLmark on dipstick.
Removethe oil fill cap located on the bottom of the engine crankcase.
Clean area around oil fill and remove oil fill cap.
Tighten the oil fill cap securely to prevent leakage.
Your engine may be equipped with either a gray or yellow oil fill cap.
Reinstall oil fill cap and tighten until fully seated.
Clean area around oil fill and remove oil fill cap and dipstick.
Remove oil fill cap and wipe clean with cloth.
Insert dipstick into the tube and rest the oil fill cap on the tube.
Remove the oil fill cap from the crankcase and.
Reinsert the dipstick into the tube and rest oil fill cap on the tube.
Remove the oil fill cap located on the bottom of the engine.
ALWAYS stop engine before removing oil fill cap.
A dipstick attached to the oil fill cap registers the engine oil level.
Oil Fill Cap and Dipstick - Check and fill engine with oil here.
Loosen and remove the oil fill cap dipstick from the oil filler tube.
Oil Fill cap ( under side maintenance cover ) - Check and add engine oil here.
Refer to the engine oil fill cap for correct SAE grade.
F - Oil Fill Cap - Check and fill engine with oil here.
DO NOT remove the hydraulic oil fill cap when the engine is running or hot.
Remove the oil fill cap to check and add lubricant when necessary.
If needed, remove oil fill cap and slowly pour oil into oil.
Remove the oil fill cap to check and add lubricant to the generator when necessary.
Models with oil fill cap Figure 2.
The Oil Fill Cap is located below the seat.
Engine oil fill cap / dipstick.
Tighten oil fill cap / dipstick securely each time you check the oil level.
Replace oil fill cap and hand-tighten.
Insert oil fill cap into oil fill hole but do not screw in Figure 25.
Unscrew the oil fill cap ( 2 ) and fill up with chain oil.
You'll also be interested in:
Examples of using Cap
Show more
Retighten the cap to the filter housing
Cap and back panel sheet steel
Do not install cap onto water bottle
Examples of using Fill
Show more
Do these steps to fill the salt container
Fill the tank with liquid smoke
I do not have to fill out a lot of forms
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
