Examples of 'oil film' in a sentence
Meaning of "oil film"
oil film: This phrase describes a thin layer of oil that covers the surface of water, often caused by oil spills or natural processes
How to use "oil film" in a sentence
Basic
Advanced
oil film
The oil film has a reinforced strength.
We supply this alloy with a light oil film.
The oil film shall be removable by aqueous.
The cleaned surface displays no residual oil film.
The residual oil film is then removed.
Oil film buildup on oil pot.
The importance of lubricating oil film.
Maximum oil film resistance at very high temperature.
The lubrication film may advantageously be an oil film.
A thin oil film functions as lubricant.
It is vital to remove the oil film.
No oil film is observed on the bath water surface.
Over time this causes some oil film accumulation.
Oil film bearing with compact hydraulic mount.
Mechanical lock for rolling mill oil film bearing.
See also
An oil film is thus created all around the bearing.
A neck seal for use in an oil film bearing assembly.
An oil film is thus formed from the fed lubricant.
Wipe all excess oil or oil film from oil pot.
The oil film is thus defined between two sealing gaskets.
Control of the quantity and uniform distribution of the oil film.
Put a clean oil film on the new oil filter joint.
Solutions for damping vibrations by an oil film have been also applied.
Oil film bearings can provide a practical alternative to roller bearings.
The medium was then covered with an oil film to exclude air.
The oil film is so thin that it does not give any porosity problems.
The thrust bearings may be formed by ball bearings or an oil film.
The oil film can also be rinsed off with warm water.
This is the threshold for the destruction of the oil film.
A smaller total oil film in this case will give the least loss.
Welding at this sliding interfaz prevented by the physical presence of oil film.
The capsules break open and an oil film forms on the surface of the cloth.
Thus there is only minimal diffusion of nitrogen through the oil film.
This is partly due to the oil film formed between the rotor and housing.
This is necessary to seal the gerator from the housing with an oil film.
Oil film bearings include sleeves received on and fixed relative to the roll necks.
Booms are now in place to recover the contaminated oil film to the extent possible.
An oil film is radially interposed between the shaft and a rigid body of the bearing.
Operating safety at hight temperature and guarantee of a good resistance of the oil film.
This increases cooling of the oil film with a greater loss of the lubricating qualities thereof.
This allows preventing the shaft from crushing the bearing oil film.
The oil film prevents wet paper from sticking to the surface of the drum dryers.
Relationship between the ratio of number of revolutions and a minimum oil film thickness.
The oil film that forms in said annular cavity performs the function of vibration damping.
Oils or fat might evaporate at high temperatures and will condense as greasy oil film.
Another problem is that the silicone oil film drastically impairs the adhesion of the surface.
This film thus receives more fuel that is also diluted in the oil film.
Distribution law of EHL oil film damping and stiffness is attemptly proposed.
Relationship between the total length of the circular portions and an oil film thickness.
Consequently, the oil film becomes thinner.
You'll also be interested in:
Examples of using Film
Show more
The film has not started yet
We are finishing the film about that invention
Film can be applied without disconnecting pump
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
