Examples of 'oil filler cap' in a sentence
Meaning of "oil filler cap"
An oil filler cap is a removable cap located on the engine or motor of a vehicle or machinery that provides access to the oil filler opening. It is designed to securely seal the oil reservoir to prevent leaks or contamination. The oil filler cap is an essential component for maintaining proper oil levels and lubrication in an engine
How to use "oil filler cap" in a sentence
Basic
Advanced
oil filler cap
Reinstall the oil filler cap securely.
Oil filler cap comes shipped with frame or can be ordered as a replacement.
Reinstall the oil filler cap and dipstick.
Reinstall and tighten the oil filler cap.
Reinstall oil filler cap and tighten securely.
Final transmission oil filler cap.
Insert the oil filler cap and hand tighten.
Place the tiller on a level surface and remove the oil filler cap.
Remove the oil filler cap.
Remove oil filler cap on the opposite side of carburetor.
Unscrew the oil filler cap.
Remove oil filler cap and catch old oil in a container.
Symbols on the oil filler cap.
Remove the oil filler cap and wipe the dipstick clean.
Clean area around the oil filler cap with.
See also
Screw the oil filler cap firmly back in place.
Check the oil level with the dipstick on the oil filler cap.
Screw back the oil filler cap as far as it will go.
Place the power head on a level surface and remove the oil filler cap.
Clean the area around the oil filler cap thoroughly to.
Remove oil filler cap and check the engine oil level.
Use six screws saved from shipping cap to attach oil filler cap to frame.
Remove the oil filler cap and the drain bolt.
Remove and discard tape from pump 's oil filler cap.
Make sure dip stick or oil filler cap is securely in place.
The oil filler cap changed to a longer tube to make filling easier.
Be sure that the engine oil filler cap is tightened securely.
After replacing the oil, securely tighten the engine oil filler cap.
Reinstall the oil filler cap and oil level dipstick.
Wipe off any spilt oil and close the oil filler cap 8.
Check that the engine oil filler cap is tightened securely.
To prevent leakage ensure machine is left in a horizontal position oil filler cap 4 uppermost.
Remove the engine oil filler cap and oil filter.
Insert the dipstick into the oil filler hole, and then tighten the oil filler cap.
Unscrew the oil filler cap and add oil up to the.
To restore the oil level, top up by means of oil filler cap B.
Reinstall the oil filler cap and close the engine casing.
Remove oil drain plug, sealing washer, and oil filler cap.
Do not screw in the oil filler cap when checking oil level.
Crankcase breather tube, Breather valve assembly, Oil filler cap.
Transmission oil filler cap lower edge of the oil filler hole.
Clean around the oil filler cap 2.
Replace oil filler cap and secure side panel with screws.
If the oil level is low, remove oil filler cap and add oil as required.
Reinstall oil filler cap and tighten the oil level check bolt securely.
Crankcase breather tube, Oil filler cap.
Fill through oil filler cap with oil according to oil capacity circuit.
Fig . D Fill the reservoir via the oil filler cap ( 8 ) with standar.
Remove the oil filler cap and oil drain plug to drain the oil.
Install the oil filler cap 1.
You'll also be interested in:
Examples of using Filler
Show more
Filler hopper with fresh coffee beans
Ensure that the filler cap is tight
Filler flap with tank cap screwed on
Examples of using Cap
Show more
Retighten the cap to the filter housing
Cap and back panel sheet steel
Do not install cap onto water bottle
Examples of using Oil
Show more
Check oil level and fill if needed
Directions for observation with oil immersion
Use olive oil instead of grapeseed oil
