Examples of 'orifice size' in a sentence
Meaning of "orifice size"
The phrase 'orifice size' is used in technical or engineering contexts to refer to the dimension or measurement of an opening or aperture, typically for the passage of fluids, gases, or particles. It indicates the diameter, width, or surface area of an orifice, which can be crucial for determining flow rates, pressure differentials, or filtration capacities
How to use "orifice size" in a sentence
Basic
Advanced
orifice size
This orifice size is optimized for gynecological specimens.
Stainless fluid nozzle orifice size.
Metering orifice size has a direct effect on leakage percentage.
Maximum working pressure that will be encountered or orifice size.
The orifice size corresponds to the stent saddle diameter.
Check for proper gas pressure and correct orifice size.
Small orifice size.
Standard numbers are on the nozzles to indicate spray pattern and orifice size.
The orifice size preferably remains constant for each strip.
Larger droplets can be expected as the orifice size is increased at a given pressure.
The orifice size also affects providing of a uniform characteristic spray pattern.
It is very important to install the correct orifice size for each burner.
The correct orifice size is the number in the far left column.
Placement can be determined by matching the orifice size to the number on the card.
The second orifice size is different than the first orifice size.
See also
The amount of room air entrained to dilute the oxygen depends on the orifice size.
The orifice size is always smaller than the size of the bead produced.
The flow passages in the filter should be smaller than the spray orifice size.
This relatively large orifice size can reduce the likelihood of valve clogging.
Such a device would allow expanding or contracting the orifice size to regulate drop size.
The desired orifice size would be readily apparent to a person skilled in the art.
Upper and lower test fixtures are assembled from a silicon sheet having a set orifice size.
The spray header orifice size can be adjusted to set final product size.
Alternatively the capillary orifice into vacuum can be replaced by a nozzle with appropriate orifice size.
Smaller spinning orifice size or higher drum rotational speed produces smaller diameter fibers.
The first port insert defines a first foam passageway having a first orifice with a first orifice size.
Select the proper orifice size for your gas and burner from the conversion chart.
The second port insert defines a second foam passageway having a second orifice with a second orifice size.
Check the burner orifice size and contact your installer if you have the wrong orifice.
An increase in WSS results in an increase in valve orifice size.
However, the orifice size may vary on a given strip.
An LCD was also built with the ability to change its orifice size.
As the orifice size decreases, the expansion effect increases.
Do not increase the Btu input rate by increasing the orifice size or gas pressure.
As the orifice size increases, the denier and basis weight tend to increase.
The nozzle inserts may also be color-coded by orifice size.
For a given manifold, the orifice size remains constant throughout the strip.
A relatively sizeable amount of force is required as the orifice size gets smaller e . g.
The orifice size is adjusted by rotating the angular position of a number of leaf elements 62.
Also, Corrigan 's nozzle technology uses a large orifice size that resists fouling.
The orifice size is designed to match the maximum operating pressure ( PMO ) of the trap.
A control unit 6 " controls the nozzle orifice size.
The illustrated second orifice size Ø2 is larger than the illustrated first orifice size Ø1.
Alternatively, the setting selected is setting B and orifice size 4.
A nozzle orifice size reference number 68 see for example, FIGS.
The spray tip had a 9-mil orifice size.
STEP iii, Determine the orifice size using Figure 10.
Optimum results were obtained with a nozzle having an orifice size of 0.762 mm.
You'll also be interested in:
Examples of using Size
Show more
Change duct size gradually to minimize turbulence
I do not want a comedian knowing my dress size
Size expressed as minimum and maximum weight
Examples of using Orifice
Show more
Install color coded orifice hoods supplied
A damaged orifice or regulator which requires replacement
Never remove threaded orifice at end of valve
