Examples of 'output of gate' in a sentence
Meaning of "output of gate"
Output of gate is the result or data produced by a gate in a system, often referring to the signal or information that is transmitted through the gate
How to use "output of gate" in a sentence
Basic
Advanced
output of gate
This signal is able to force the state on output of gate C.
The output of gate 77 provides positive pulses on the falling edges of input signal IN.
Acknowledgement A ack at the output of gate C ′ is thus not generated.
The output of gate 60 supplies clock pulses CKS to the aforementioned simulation circuit.
This line is supplied by the output of gate 11.
The output of gate 41 enables astable operation.
The signal on the inverted output of gate 79 is shown in diagram g.
The output of gate 17 is connected to the output terminal 3 of the sensor.
The content of bit B 1 is replaced by the state present at the output of gate 28.
The signal at the output of gate 47 is used for a number of purposes.
An error driver 80 is connected at its input to the output of gate 72.
The output of gate 43 provides an alarm signal AL.
The signal present at the output of gate 4 again assumes the value " 1 ".
The output of gate 54 is also connected to terminal STPOUT.
The signal PIM appears at the output of gate 502.
See also
The output of gate 27 thus yields a signal corresponding to that shown in FIG.
Flip-flop 4 has its input P also connected to the output of gate AND-NO 5.
The output of gate 40 directly provides a count C 4 indicative of a state 1 of the four cells.
This causes the output of gate U4C to go low and transistor Q4 to turn off.
Output of gate 62 is connected to the load terminal of counter 56.
Consequently, the output of gate 11 is low, so that the discharger is inoperative.
When the output of gate U4D goes low, transistor Q5 turns off conserving logic power.
The output of gate A4 provides the clock signal INH2.
The output of gate G4 is connected to the third input of gate G9.
The output of gate OR1 constitutes the output A1 of alarm circuit 3.
The output of gate 80 is connected to an input of inverting amplifier 81.
The output of gate 43 then goes to 0 and indicates a failure.
The output of gate 73 then is low.
The output of gate 45 is transmitted to the second input of gate 40.
The output of gate 48 is connected to the clock input CK of a counter 52.
The output of gate 9 is looped onto the reset RAZ5 of counter 5.
The output of gate 20 generates a high active reset signal RESET of counter 12.
The output of gate 432 is applied to the FIFO input clock terminal.
You'll also be interested in:
Examples of using Gate
Show more
This gate will not open itself
Drive through the gate in front of you
The gate address will be in the log
Examples of using Output
Show more
One output will contribute to this outcome
Illuminates when output is sent to the tray
Output signals common to measuring technology are available
