Examples of 'panel thickness' in a sentence
Meaning of "panel thickness"
panel thickness: This phrase refers to the measurement of the thickness of a panel, such as a board or a piece of material used in construction or manufacturing
How to use "panel thickness" in a sentence
Basic
Advanced
panel thickness
Target panel thickness.
Rather the width of the plank is that of the desired panel thickness.
Allow for panel thickness when planning the finished opening depth.
The building panels of the present invention have an essentially uniform panel thickness.
Panel thickness According to the model.
Setting the fastening brackets requires each wall to be sketched with the panel thickness.
This causes the entire panel thickness to change ( grow in thickness ) in the seam área.
The cross-sectional height of a frame is that of the desired panel thickness.
Recommended minimum panel thickness to maintain Type 4X rating.
In one form, the outer skin is curved over at least the panel thickness.
Panel thickness and Operating Temperature ;.
The calcium sulphate support allows a finished panel thickness of 40 mm to be obtained.
Panel thickness 2 mm.
The preventive effect is particularly prominent when the metal panel thickness is under 1 mm.
TOP middle-density fibre panel thickness 25 mm veneered marble or glass.
See also
With the door closed, position the top of the unit using the panel thickness gauge.
This enables to reduce the panel thickness to, for instance, 70 mm.
Turning now to the description of FIGURE 4, an embodiment illustrating a variable panel thickness is described.
Stainless steel panel thickness 0.5 mm. with sharp edges rounded for safety reasons.
When designing each backing die, a preferred range of finished panel thickness is first determined.
The panel thickness 39 is generally a small fraction of the panel width 34 and panel length 38.
The mini A3 Slide Latch features snap-in installation and is available in two panel thickness.
Determination of plating rate = 0.5 x ( panel thickness after plating - panel thickness before plating in µm ).
The flush mounting installation requires a minimum panel thickness of 13 mm.
Maximum panel thickness is 7 mm. Smart clips hold panels from <5 mm in position.
Risers with a maximum thickness of 4/5ths of the panel thickness may be milled selectively.
Mounting recommendation 0 mm The flush mounting installation requires a minimum panel thickness of 13 mm.
Space for cable, 10 mm Front panel thickness max . 4mm Installation variations.
The device B is set up to deal with a panel thickness of from 15 mm to 30 mm.
You'll also be interested in:
Examples of using Panel
Show more
Center the panel on the freezer door
Panel discussion on agriculture and rural development
Replace the panel by reversing this step
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
