Examples of 'phase error' in a sentence
Meaning of "phase error"
Refers to a mistake or error that occurs during the phase or stage of a project, process, or sequence of events, often indicating a deviation from the intended or desired outcome
How to use "phase error" in a sentence
Basic
Advanced
phase error
Phase error compensation in single correlator systems.
An estimate of the phase error is extracted therefrom.
The value txy is proportional to phase error.
Correct a phase error caused by a switching time.
Root mean square phase error.
A phase error due to a frequency divider is also small.
The correction of the phase error is explained below.
This is equivalent to a negative phase error.
In this way the phase error introduced is minimized.
Is a measure of the standard deviation of the phase error.
Thus the phase error is estimated in each time slot.
The time error is proportional to the phase error.
The phase error will be progressively reduced in a linear fashion.
E designating the code phase error.
The phase error is reduced to only one clock period.
See also
The slope represents phase error.
Phase error trajectory.
This pulse width is a phase error not a frequency error.
This takes place by detecting and correcting a phase error.
Apparatus for compensating phase error in inverter output voltage.
The phase error has now been reduced to three clock periods.
Embodiments may generate a phase error estimate every chip.
Three blocks have been added to compensate the static phase error.
The agreement of the phase error estimates was very high.
The charge transferred in a comparison cycle is proportional to the phase error.
Very small phase error.
The period of the oscillator signal depends on the phase error.
For example it may increase the phase error in the transmitted signal.
The readable capture register output is the line phase error.
This phase error also includes any receiver and detector errors.
Under normal conditions the measurement phase error is small.
Both the phase error reproducer and the predictor are consisted by accumulators.
A more detailed explanation of the phase error problem follows.
A phase error signal that is indicative of a phase error of the oscillatory signal is generated.
Where θ is the phase error.
The phase error data is then wrapped to determine the shortest phasing distance.
The scaled samples represent the phase error signal.
One source of phase error is the time shift that occurs due to integration.
Such architectures are known to reduce the static phase error structurally.
Rapid reference acquisition and phase error compensation for radio transmission of data.
It would obviously be desirable to limit as much as possible the phase error.
This topology has an advantage in prohibiting phase error propagation and reflection.
The amount of adjustment required for maximum correlation is used in estimating phase error.
Each class has an allowable maximum phase error for a specified load impedance.
The trace phase is then compared to a reference trace phase to produce a phase error.
The phase error is estimated from the channel filter output signal and corrected.
The result of the comparison represents the phase error of the THz wave.
The phase error signal is coupled to control the oscillation rate of the variable oscillator.
This triggers an accurate synchronizing action during the period thus minimizing phase error.
Resulting time samples contain the phase error information from the selected target only.
You'll also be interested in:
Examples of using Phase
Show more
The first phase evolved over millennia
Review of the execution of the design phase
The results of phase two have been amazing
Examples of using Error
Show more
Error code messages reduce troubleshooting time
Current value error detection can be adjusted
Error type possible meaning why what to do
