Examples of 'pilot hole' in a sentence
Meaning of "pilot hole"
A pilot hole is a small hole that is drilled or created before drilling a larger hole. It helps to guide and prevent the larger drill bit from wandering or slipping
Show more definitions
- A narrow hole drilled or punched into a surface, to facilitate the insertion of a wider screw, nail, drill bit, or other boring tool.
How to use "pilot hole" in a sentence
Basic
Advanced
pilot hole
We can drill a pilot hole right there.
No pilot hole is required for wall anchors.
Insert pivot knob into pilot hole.
The pilot hole has two purposes.
A nail is inserted into the pilot hole.
Pilot hole and reamer axis are not aligned.
Make sure to drill a pilot hole first.
Drill a pilot hole in your workpiece.
Be careful not to drill pilot hole too deep.
The pilot hole was made using cutting drills.
They want us to get a pilot hole drilled by lunch.
The pilot hole is drilled and then expanded.
Exercise care in preparing a pilot hole suitable for.
The pilot hole is then enlarged with a spade drill.
Make sure you drill a pilot hole first.
See also
A pilot hole is first drilled prior to insertion of the anchors.
Inspect the wheel pilot hole prior to installation.
Then start by drilling a pilot hole.
Then drill a pilot hole for each interval.
This hole is called a pilot hole.
Drill a pilot hole of correct size as recommended by screw manufacturer for.
Insert the pilot guide into the pilot hole.
A pilot hole is necessary when drilling with larger twist drills.
Clamp panel in position and mark pilot hole locations.
Drill a pilot hole though any point on the line of cut.
We could not get the second pilot hole drilled.
Start by drilling a pilot hole in the centre of the marked circle.
First we drill a pilot hole.
The pilot hole was aligned with the nail shank tip.
Use an iron drill to make a pilot hole for a wood.
A pilot hole must be.
Medium screws in hardwood or large screws in hardwood with pilot hole.
Providing a pilot hole.
Drill a pilot hole when driving screws into thick or hard materials.
The pilot flame should be seen through each pilot hole.
Where possible use a pilot hole before drilling a large diameter hole.
These functions are of great use for creating a pilot hole for drilling.
Drill the pilot hole slightly larger than the draw stud.
Creating a pilot hole.
Prior to drilling large holes use a smaller bit to drill a pilot hole.
Thread the saw blade through the pilot hole in your workpiece.
A pilot hole guides the screw and prevents splintering or distortion of the wood.
The dentist or surgeon will drill a pilot hole for the implant.
Using the proper size pilot hole is as important in tapping as any other factor.
Thus the use of separate pilot drills to preform a pilot hole is avoided.
Start saw and cut a pilot hole in the center of the intended circle.
This is a substitute for a match which requires opening the pilot hole cover.
Drive the insert into the pilot hole with the insert tool.
Each thread of the bolt should vanish into the ceiling pilot hole.
Mark on wall the pilot hole locations through the template and remove template.
You'll also be interested in:
Examples of using Pilot
Show more
Pilot projects on payments for ecosystem services
Implementation of pilot projects to develop plant cover
Pilot flew into a mountain in the fog
Examples of using Hole
Show more
So does that giant hole in the wall there
The hole of the steam spout is clogged
Cut the piping hole sloped slightly
