Examples of 'pinion gear' in a sentence
Meaning of "pinion gear"
A pinion gear is a small gear with teeth that meshes with a larger gear, usually called a gear wheel or gear rack. Pinion gears are commonly used in mechanical systems, such as automotive transmissions or steering systems, to transmit power and motion between the driving gear and the driven gear
How to use "pinion gear" in a sentence
Basic
Advanced
pinion gear
The steering column carries a pinion gear.
Stainless steel pinion gear and main shaft.
The dial is attached to another pinion gear.
Change blades or pinion gear to reduce the headspeed.
They tend to eat the pinion gear.
The pinion gear is rotated by a steering input shaft.
In an embodiment the pinion gear has straight teeth.
The pinion gear only goes on one way.
Match numbered holes with pinion gear number.
Pinion gear below the control panel faces upward.
Main body of the vibration generator pinion gear.
The pinion gear is operatively connected to the driving apparatus.
Remove screw holding the pinion gear cover in place.
Position pinion gear using paper header from screw bag.
Regularly clean the large bevel gear and pinion gear.
See also
Remove the pinion gear from the motor before testing.
Loosen the setscrew and remove the installed pinion gear.
Be careful not to attach pinion gear burdening motor and gear.
The control element has two rods and a pinion gear.
The rack and pinion gear type is employed in a rack railway.
Check the spur gear and pinion gear for wear.
The pinion gear is connected with and rotated by a steering input shaft.
Thoroughly grease the bevel pinion gear and bevel gear.
The damper selectively dampens movement or rotation of the pinion gear.
The pinion gear is mounted to a drive shaft passing through the bore.
A damper is operably connected to the pinion gear and to the carriage.
The master gear is adapted to transmit a rotation of a handle to a rotor vÃa a pinion gear.
The rotational position of the pinion gear is sensed by the memory structure.
The rack is assured of always being in driving contact with the pinion gear.
Use a smaller pinion gear or larger spur gear to lower the gear ratio.
Install the motor screws corresponding to the number of teeth on the pinion gear.
Loosen the pinion gear set screw to remove the installed pinion gear.
The chute control rod will fit snuggly into the pinion gear.
A pinion gear is rotatably mounted in the framework in mating engagement with the rack.
In the presently preferred practice the pinion gear and output gear are beveled.
The pinion gear engages the sun gear and the ring gear.
The elongate member has a rack portion which engages teeth of a pinion gear.
Silver indicator arrow on the pinion gear below the control panel faces upward.
A spring force biases the rack into contact with the pinion gear.
The pinion gear is engaged with the sun gear and the ring gear.
The rotor is fixedly coupled to an end of the pinion gear for rotation therewith.
The pinion gear size is limited as a function of the center distance between the shafts.
The ring gear is in driving engagement with a pinion gear coupled to a rotatable input member.
The steering wheel carries a ring gear which meshes with part of the pinion gear.
This allows the pinion gear to turn the flywheel ring gear for starting.
Correctly align the prop shaft gear with the pinion gear on the motor.
A pinion gear is a unique situation to the larger ring gear of FIGS.
Check the gear mesh between the pinion gear and the main gear.
The clutch disk is fixed to rotate with the drive shaft and the pinion gear.
Bushes serving as bearings for the pinion gear and the output gear are not needed.
You'll also be interested in:
Examples of using Pinion
Show more
A sliding pinion can be cut in one operation
Repeat procedure for rear pinion bearing
Pinion tooth lubrication for slewing ring
Examples of using Gear
Show more
Automatic start gear detection active or not
Gear choice for deceleration or cruise phases
Inspection of draw gear and chafing irons
