Examples of 'pinion shaft' in a sentence
Meaning of "pinion shaft"
pinion shaft - a mechanical term that likely refers to a shaft connected to a gear in a machine or vehicle
How to use "pinion shaft" in a sentence
Basic
Advanced
pinion shaft
Attaching the pinion shaft handles.
Connected directly to the right side pinion shaft.
Assemble handwheel to pinion shaft and turn handwheel to seat brake components.
I have three of the four bearings on the pinion shaft.
Assemble the pinion shaft nut to the shaft until the nut bottoms.
Constant velocity joints comprise an inner race that is connected to a pinion shaft.
A method for lubricating bearings supporting a pinion shaft in a pinion shaft housing is disclosed.
Pinion shaft bearing is not included, it must be ordered separately.
Methods and structures to connect the inner race to the pinion shaft vary.
It shows a reduction gear with pinion shaft supported by roller bearings lubricated by splash lubrication.
Common causes of stock pump failure are debris and excessive pinion shaft run out.
The ends of the pinion shaft fit in cavities 88 formed radially in the housing halves.
Bent Geareducer shaft Check fan and pinion shaft with dial indicator.
The pinion shaft receives rotation from a source of rotational movement, such as a vehicle powertrain.
Liquid-lubricated bearing and vehicle pinion shaft support device.
See also
The pinion shaft is also therefore connected to the inner race 86 through the nut.
The S & S design tolerates more pinion shaft run out without damage.
Meanwhile, there are the rollers 7 on the side of the pinion shaft 9.
Combined 4 pinion shaft parts- differential gear.
Couplings 82 retain the bevel gears in place on the shafts and pinion shaft.
The pinion shaft is also therefore axially constrained to the inner race 146 through the nut.
Fig . 5 is a process flow chart 500 for lubricating bearings supporting a pinion shaft in a pinion shaft housing.
A pinion 9a provided on a pinion shaft 9 meshes with a rack 8a of this rack shaft 8.
A sleeve 13 is connected by way of a pin 12 to the base end of the pinion shaft 9.
Fig . 41 a perspective view of the pinion shaft and spiral bevel pinion ;.
Therefore, the pinion gears 20 do not rotate relative to the pinion shaft 22.
The pinion shaft 76 also extends through the opposite end of the boot sleeve 28.
Torque is transmitted from the engine to drive pinion shaft 21 and to gear wheel 22.
Consequently, when the pinion shaft 9 rotates, this sleeve 13 also rotates integrally therewith.
Sun gear shaft 407 rotates considerably slower than the input pinion shaft 405A thus generating less heat.
Also removes pinion shaft inner bearing race on 1954 to present Sportster and air cooled Buell 's.
A method for lubricating bearings supporting a pinion shaft ( 405A ) in a gear box, comprising the steps of,.
Input 26 includes a rotatable pinion shaft having a pinion gear 42 the meshes with ring gear 38.
Screw the handle ( A, Fig 1 ) into the pinion shaft and tighten.
A cross-sectional view of the pinion shaft housing taken along the lines 4E-4E of Fig.
A perspective view of the pinion shaft housing ; Fig . 4D.
Fig . 4J a top view of the pinion shaft and spiral bevel pinion ;.
An end view of the pinion shaft housing ; Fig . 4E.
You'll also be interested in:
Examples of using Pinion
Show more
A sliding pinion can be cut in one operation
Repeat procedure for rear pinion bearing
Pinion tooth lubrication for slewing ring
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
