Examples of 'pipe sizes' in a sentence
Meaning of "pipe sizes"
pipe sizes - This phrase typically refers to the different dimensions and specifications of pipes used in plumbing or industrial applications, indicating variations in diameter and length.
How to use "pipe sizes" in a sentence
Basic
Advanced
pipe sizes
Smaller package on the larger pipe sizes.
Recommended pipe sizes for gas supply line.
Inlet and outlet sizes are nominal pipe sizes.
Pipe sizes and pipe insulation.
Single rail flow sensor for pipe sizes.
Standard pipe sizes available to suit all applications.
Every pipes should me marked with pipe sizes.
Smaller pipe sizes than centralized direct expansion systems.
Good for smaller pipe sizes.
Pipe sizes generally range between three and six inches in diameter.
Said embodiment is preferred for most pipe sizes.
The pipe sizes within a system may need to be altered to increase flow.
Here are the diameters in inches and mm of the main pipe sizes.
Filter can be adapted to various pipe sizes by using reducing adapters on either end.
This twin tip sensor is suitable for installing in smaller pipe sizes.
See also
Rotate cam toward larger pipe sizes until adjusting screw reaches end of slot.
Spring loaded clamp inserts in plastic for concentric clamping of different pipe sizes.
Different pipe sizes and different strip profiles will require different degrees of strip compression.
The use of carbon dioxide enabled considerably smaller pipe sizes than the water.
These pipe sizes must have the same size as the connected indoor units pipe sizes.
And is also adaptable for the whole range of pipe sizes found in Steam Boilers.
Pipe sizes for compressed air lines Air.
The relationship between DN and NPS pipe sizes are as follows.
In addition, pipe sizes may be smaller by their diameters.
PVC or ABS adapters may be purchased to fit other discharge pipe sizes.
Rotate Cam in direction of larger pipe sizes until Adjusting Screw bottoms in slot.
For new installations, use the standard pipe sizes.
Figures assume pipe sizes as shown on page 4.
This allows velocities greater than 4 feet per second in pipe sizes 2 inches and larger.
For example, pipe sizes might be small in subsequent higher pressure stages.
Different combustion conditions, drill rigs, and pipe sizes are investigated in the study.
The size of the U-shaped body can be varied to fit different pipe sizes.
Consequently, varying pipe sizes require the use of various size pipe cutters.
PSS system design and calculation of number of pump stations, pump selection and pipe sizes.
How to dimension and select pipe sizes and materials to compressor or free cooling systems?
Corresponding to nominal pipe sizes NPS,.
UNIX platforms handle pipe sizes a bit differently. They can be set using ulimit.
High production speed of up to 25 m / min depending on the pipe sizes.
All pipe sizes are based on the following, copper pipe Type I.
Select chilled water temperatures, flow rate, and primary pipe sizes.
All pipe sizes are shown as nominal pipe sizes ( NPS ).
Easy-to-slide V-block with two different bevel angles for good guidance of small pipe sizes.
Plates may be purchased separately for pipe sizes 4 " to 12 " when using insertion probes TXR.
If the horizontal distance exceeds 25 feet, see Chart 1 for the recommended pipe sizes.
The inline style flow meters are available for pipe sizes from ¼ ” to 2 ”.
You'll also be interested in:
Examples of using Pipe
Show more
Pressure transmission pipe in the combustion chamber
Pipe is the heaviest wave in the world
Two pieces of pipe and a bicycle chain
Examples of using Sizes
Show more
The following breaker sizes are recommended guidelines
The sizes of water connection points are as follows
Limited by boulder sizes and equipment capacity
