Examples of 'piping should' in a sentence
Meaning of "piping should"
Piping should: This phrase is commonly used to indicate that specific pipes or pipelines are recommended or required for a particular purpose, typically in construction, plumbing, or engineering contexts
How to use "piping should" in a sentence
Basic
Advanced
piping should
All piping should be of suitable metallic material.
The termination of hard piping should include a sediment.
The piping should be of a material that conforms to.
All old gas connectors and gas piping should be discarded.
This piping should be closer to the hem.
The pipe thickness of the refrigerant piping should comply with applicable legislation.
Piping should be kept as short as possible.
The pump and piping should be well sealed.
Piping should be mounted so that the flare is not subjected to mechanical stress.
No portion of the piping should extend below pump suction.
Piping should be level or slope gradually downward from the source of supply.
Evaluate whether process piping should be handled centrally or locally.
The piping should be lined up without having to spring or twist it into position.
In cold weather climates all piping should be insulated to minimize heat loss.
All piping should be sloped to an accessible drain-point.
See also
Insulation of refrigerant piping Both gas and liquid piping should be insulated.
Tanks and piping should be reliably protected against freezing.
Here too, the corresponding piping should be mentioned.
Discharge piping should be as short as possible to reduce pipe friction losses.
I was wondering what size of piping should i do?
Now the piping should be going straight up into the air.
On this topic, the document on flexible piping should be consulted.
Suction piping should never be smaller diameter than the pump suction.
Minimum wall thickness The existing piping should have a design pressure of 3.3 MPa.
All gas piping should be tested after installation in accordance with local codes.
The valve nearest the flexible piping should be capable of rapid closure in emergencies.
Piping should be no smaller than the pump discharge and / or suction connections.
The pipe thickness of the refrigerant piping should comply with relevant local and national regulations.
Vent piping should be installed as straight as possible to prevent back-pressure on the fans.
Sizing and / or installing of gas piping should only be performed by a qualified individual.
Buried gas piping should be periodically inspected for leaks and corrosion if piping is metallic.
The sump basin and cover, pump, and piping should be protected from freezing temperatures.
Suction piping should be flushed BEFORE connection to the pump.
The size of valve and piping should be at least 100 mm in diameter.
The weight of the piping should be supported independently and not carried by the pump.
The interconnection piping should be kept to a minimal volume to enhance the accuracy.
Preventive Actions Piping should be designed to avoid unnecessary stress concentrators where practicable.
Generally, the piping should not have a diameter larger than 2 ½ inches.
All exposed piping should be stenciled in white with a warning reading " NON-POTABLE WATER . ".
You'll also be interested in:
Examples of using Piping
Show more
Cut the piping hole sloped slightly
In case of bottom right or bottom left piping
Exposed piping beneath counters and sinks
