Examples of 'plate screws' in a sentence
Meaning of "plate screws"
Plate screws are small metal screws used to secure a plate to bone during a surgical procedure. These screws are typically used in orthopedic surgeries to stabilize fractures or repair bone deformities
How to use "plate screws" in a sentence
Basic
Advanced
plate screws
Die head cover plate screws are loose.
Remove one of the switch housing plate screws.
Remove the kick plate screws and then the kick plate.
Remove the two upper end plate screws.
Remove the two needle plate screws and take off the needle plate.
Loosen but do not remove the three kerf plate screws.
Hang blower unit onto blower plate screws through the large part of the keyhole.
Install the base plate and all base plate screws.
Unscrew the needle plate screws with a screwdriver to remove the needle plate from the machine.
Remove the lube plate screws.
Back plate screws Stainless steel.
Just for the plate screws.
Rotate the switch housing adapter clockwise to engage switch housing plate screws.
The fixture block side plate screws are not tight.
Loosen the eight installation bolts and the set plate screws.
See also
Slacken the throat plate screws and remove the throat plate 13.
Secure the angle bracket with previously removed end plate screws.
Wall mount plate Screws & wall plugs.
Screw the cross fader to mixer with the fader plate screws b.
Remove three fitter plate screws ( S ) from fitter plate on underside of motor.
Replace the back plate and secure it with the four back plate screws.
Remove the console front plate screws red arrows.
Attach the mounting plate to the back of the control with the 2 mounting plate screws.
Remove the axle plate screws 1.
Re-insert the previously removed fitter plate screw ( U ) and securely tighten all fitter plate screws U.
Lock the ash pail mantle with 4 plate screws from the inside 5D.
The guide plate screws and guide plate are then removed ( Figure 54 ).
OK stickers are placed on the back plate screws.
Re-insert switch housing plate screws ( W ) that were previously removed.
Loosen but do not remove the other two fitter plate screws HH.
Fully tighten both cover plate screws using the 6/4mm hex key.
Unscrew the screws of the crossfader plate screws 18.
Tighten the three 8-32 x 12mm switch housing plate screws to secure the switch housing adapter.
Lock the ash pail mantle with 4 plate screws from the.
Open the hinged front cover and remove the stitch plate screws with the L-screwdriver k.
Step 2, Loosen dividing plate screws.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
