Examples of 'plunge cut' in a sentence
Meaning of "plunge cut"
plunge cut: This phrase is used in woodworking or carpentry and refers to a cutting technique where a tool or blade is inserted directly perpendicular into a workpiece, usually to create a deep or straight cut. It is commonly used with saws or routers
How to use "plunge cut" in a sentence
Basic
Advanced
plunge cut
Do not plunge cut in metal surfaces.
Follow these directions to plunge cut.
Enlarge the plunge cut as shown in the illustration.
Turn on the tool and make the plunge cut.
Plunge cut grinding in multiple production.
Do not attempt to plunge cut through the plastic guard.
Only soft materials may be processed using the plunge cut procedure.
Make a plunge cut in the center of the notch.
The serviceman was attempting to make a plunge cut in a piece of wood.
Make a plunge cut in the centre of the notch.
A riving knife will interfere with a plunge cut causing kickback.
Do not plunge cut or pocket cut with this saw.
Position that the blade forms an appropriate angle for the plunge cut.
Do not try to plunge cut into hard materials such as steel.
All common routing tasks can be performed with ease with the plunge cut router.
See also
The plunge cut is made with the guide bar nose.
DO NOT attempt to plunge cut metal.
Make the plunge cut and repeat for all biscuit locations.
Clamp the workpiece, align the tool and make the plunge cut.
Do not attempt to plunge cut if you are not experienced with these cutting techniques.
Work mode, Cutting with plunge cut saw blade.
Plunge cut saw Hexagon head wrench.
Column A shows how to plunge cut with the teeth of the blade facing down.
BIM plunge cut saw blade, wood and metal.
Lum stroke setting 3 and start the plunge cut into the workpiece Figure 6.
Make the plunge cut very carefully danger of pushback!
Turn the tool on, make the plunge cut and repeat for each layout mark.
Do not plunge cut into metal surfaces see " Cutting Metals.
Column A shows how to plunge cut with the teeth of the blade facing downward.
HCS plunge cut saw blades, wood.
Column B shows how to plunge cut with the teeth of the blade facing upward.
BIM plunge cut saw blades, metal.
Do not oil the plunge cut saw, cause cutting must be.
Enlarge the plunge cut as shown in illustration fig . 28.
