Examples of 'plunge cutting' in a sentence
Meaning of "plunge cutting"
This phrase is used in the context of woodworking or machining, specifically referring to a technique where a tool is inserted or plunged directly into a workpiece to create an initial deep cut or groove. It implies a rapid and forceful downward movement to quickly penetrate the material
How to use "plunge cutting" in a sentence
Basic
Advanced
plunge cutting
Plunge cutting is only possible in soft materials.
Orbital action is recommended for plunge cutting.
Avoid plunge cutting for metallic materials.
It is not for bevel cutting or plunge cutting.
Plunge cutting is an action unique to jigsaws.
Use the track when plunge cutting.
Plunge cutting wood or wall board.
Never perform plunge cutting with this saw.
Plunge cutting may only be used on.
We do not recommend plunge cutting with a scroll blade.
Riving knife must be replaced after plunge cutting.
We do not recommend plunge cutting on materials other than wood.
Plunge cutting may not be possible in some hard materials.
Not be used for plunge cutting.
Use the plunge cutting technique only on soft materials.
See also
Use only short saw blades for plunge cutting.
Plunge cutting is allowed only in soft materials such as wood or plasterboard.
Radial plunge cutting.
The fluted mill ends are not designed for plunge cutting.
Plunge cutting may be done two ways depending on how the blade is inserted.
Always use the riving knife except when plunge cutting.
Plunge cutting is useful and timesaving in making rough openings in softer materials.
If a circular saw features a riving knife it must be removed before plunge cutting.
Riving knife causes interference during plunge cutting and can create kickback.
Plunge cutting refers to blind cuts in the workpiece made by either raising the blade.
This ensures better directional control and safe use of the machine during plunge cutting.
To make plunge cutting easier, use a heavy gauge blade.
Do not work metal materials with the plunge cutting procedure!
Plunge cutting is possible only with the mitre angle set at 0.
The riving knife must always be re-fitted after plunge cutting.
Swing the machine slowly into the plunge cutting position - risk of kickback and pushback!
In order to avoid kickbacks, the following instructions absolutely must be observed when plunge cutting.
With this tool, you can perform plunge cutting on plywood panels and thin board materials.
To avoid kickbacks, the following in-structions MUST be observed when plunge cutting.
WARNING, Never perform plunge cutting with this saw.
A circular saw with a permanent, non-removable riving knife is NOT suitable for plunge cutting.
Attach plunge cutting bit as described under Installing / Removing Accessories.
Rotation, Rotating spring chucks ensure perfect concentricity for turning and plunge cutting operations.
When plunge cutting with a blade inclined more than 15 from a vertical position, observe the following.
Use only saw blades with a maximum length of 100 mm for plunge cutting.
The TIGER SAW can be used for plunge cutting wood, plywood, wallboard, and plastic materials.
Blades longer than 6 in . can whip and should not be used for plunge cutting.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Plunge
Show more
Plunge cutting is only possible in soft materials
And we will all plunge to our deaths
Souls plunge into a river of boiling blood
