Examples of 'polymer slurry' in a sentence
Meaning of "polymer slurry"
polymer slurry: This phrase is used in the context of material science and engineering to refer to a mixture of polymer particles suspended in a liquid. It is commonly employed in manufacturing processes, such as in the production of plastics and composites
How to use "polymer slurry" in a sentence
Basic
Advanced
polymer slurry
The polymer slurry was allowed to settle and decanted.
Recovering said treated resin from said polymer slurry.
The polymer slurry is circulated by an impeller driven by a motor.
The solid polymer was separated from the polymer slurry by depressurising.
The polymer slurry is acidified and the water is removed.
The polymer produet was recovered by allowing the solvent of the polymer slurry to evaporate.
Polymer slurry is discharged from the loop reactor by means of settling legs.
The above weight percentages are based on the total weight of the polymer slurry.
The polymer slurry is withdrawn continuously from the reactor through an outlet.
After termination of the polymerisation the reactor was vented and the polymer slurry discharged.
The polymer slurry is fed to the top of the inner cylinder of the screen.
The document does not disclose how the polymer slurry is withdrawn from the loop reactor.
The entire polymer slurry was evaporated to dryness overnight under a well ventilated hood.
The polyamine and polyDADMAC solutions worked in all cases with each type of polymer slurry.
The polymer slurry was then filtered and the methanol slurry procedure repeated.
See also
The treated PPS resin was recovered from the polymer slurry by filtration.
The polymer slurry from the prepolymerization reactor was fed to the loop reactor.
As the polymerization progresses polymer slurry accumulates in the settling leg 18.
The polymer slurry was filtered and the water slurry was repeated one more time.
After the polymerization was halted, the polymer slurry was transferred into a evaporation dish.
Polymer slurry is withdrawn from the first reactor and directly passed to the second reactor.
The second time the polymer slurry was blended for 5 minutes.
Polymerization was carried out for 1 hour, at which time the resulting polymer slurry was filtered.
Preferably the polymer slurry is contacted with the hydrocarbon diluent in at least two steps.
Polymerization was carried out for 2 hours, at which time the resulting polymer slurry was filtered.
The polymer slurry from the loop reactor was transferred to the GPR.
However, present methods for concentrating the polymer slurry of a loop reactor have been unsatisfactory.
The polymer slurry from the loop reactor was fed to the GPR.
The mechanical dryer ( s ) convert mechanical energy into heat to dry the polymer slurry.
The polymer slurry from the loop reactor is transferred to the first GPR.
Process according to claim 1, wherein the polymer slurry is continuously discharged from the polymerisation reactor.
The polymer slurry is continuously withdrawn from the loop reactor A through an outlet nozzle.
After the polymerization, the polymer slurry was transferred into a evaporation dish.
The polymer slurry was then filtered, after which the methanol slurry procedure was repeated.
Curing the pre-ceramic polymer slurry to form a green body ;.
The polymer slurry is continuously withdrawn from the loop reactor 1 through an outlet nozzle.
As the polymerization progresses polymer slurry accumulates in these settling legs 109.
The polymer slurry is continuously withdrawn from the loop reactor and fed to a high-pressure flash.
Following completion of the first polymerization step, the polymer slurry was cooled to 50°C.
The last time the polymer slurry was blended for 5 minutes.
Polymer slurry containing 20-30 wt. % butyl rubber continuously overflows from the reactor through a transfer line.
Applying the pre-ceramic polymer slurry between the first and second articles ;.
Mixing the polymer slurry and the solution to form a vehicle concentrate and adjusting pH ;.
FIG . 8 is an SEM of a pre-ceramic polymer slurry with SiC filler on SIC fibers.
The polymer slurry from the loop reactor is transferred to the 1 st GPR.
The filtrate collected from the polymer slurry had a pH of 9.25.
Mixing the polymer slurry and the solution to form a vehicle concentrate ;.
A buffer solution is then added to the heated polymer slurry in wash tank 99 through line 102.
The overflowing polymer slurry was washed and dried to obtain an acrylonitrile-based copolymer.
The polymer slurry from the loop reactor was fed intermittently to the GPR vía a 1 " line.
You'll also be interested in:
Examples of using Slurry
Show more
Storage of slurry and other liquid manures
Emission abatement measures for slurry storage
Give a slurry of activated charcoal in water to drink
Examples of using Polymer
Show more
Injected polymer compound shell in three sizes
We seem to be a bit light in the polymer sciences
High resistance polymer flow indicator cover
