Examples of 'polymer solids' in a sentence
Meaning of "polymer solids"
polymer solids: substances that are made up of polymer molecules and exist in a solid physical state
How to use "polymer solids" in a sentence
Basic
Advanced
polymer solids
The polymer polyol comprises polymer solids.
Polymer solids on a clay solids basis.
Polyol polymer dispersions are dispersions of polymer solids in a polyol.
The polymer solids are then discharging from the second flash tank.
This problem becomes more severe as the polymer solids are increased.
A higher polymer solids level will increase the need for surfactant.
These problems can be accentuated by high polymer solids concentrations in the heater.
The polymer solids can be maintained at a desired level in the intermediate pressure zone.
The polymerisation reactor effluent comprises a slurry of polymer solids in a liquid medium.
The concentration of the acrylic polymer solids in this emulsion composition is generally important.
The type and concentration of surfactant are typically dependent on the polymer solids level.
Apparatus and method for removing polymer solids from slurry loop reactor.
The type and concentration of surfactant is typically dependent on the polymer solids level.
A transporter tank may be used to transport polymer solids after the intermediate pressure zone.
Transfer vessel between flash tank and purge column for recovering polymer solids.
See also
Process for recovering polymer solids with a transfer vessel between flash tank and purge column.
Diluent vapor or other polymerization medium is separated from polymer solids in the chamber.
More preferably, the polymer solids are selected from polyethylene or polypropylene.
The microemulsion can also be stripped to increase the percentage of polymer solids thereof.
The % actives are measured as polymer solids by moisture balance.
The polymer solids residence time preferably is maintained at substantially zero to 2 minutes.
This sample was treated with 8 percent styrene based on weight of the polymer solids.
Preferably, the polymer solids are formed from at least one olefin monomer.
A commercial-sized reactor contains thousands of pounds or kilograms of polymer solids at any given time.
However, the polymer solids tend to agglomerate as the polymer warms to ambient temperatures.
The solution is adjusted to 11 % polymer solids by addition of water.
The polymer solids must be removed, as the solids would foul the carbonylation process.
Figure 3 shows an apparatus for recovering polymer solids form a polymerisation effluent according to a third embodiment.
The final solution contained about 6 % polymer solids.
Each solution could have 5 % polymer solids by weight based on the weight of the solution.
It will generally contain less than about 1 % polymer solids.
In some systems, the polymer solids may be continuously withdrawn from the intermediate pressure zone.
The resulting acrylic polyol resin solution is 70 % by weight of polymer solids.
A stable latex with a polymer solids concentration equal to 25 % by weight was obtained.
To this solution was added various levels types of plasticicers at 30 % w / w on polymer solids.
The total polymer solids in the preformed stabilizer is 5.4 weight percent.
The reactor content is adjusted with deionized water to give 20 % polymer solids.
These polymer polyols have polymer solids contents generally in the range of 5 to 50 wt %.
Pound per cubic foot density foam at 20 % graft polymer solids level.
Total polymer solids of the tagged polyDADMAC was measured at 15 %.
The resulting acrylosilane polymer solution has a polymer solids content of about 66 %.
Following the flash process, polymer solids 3 are passed to a purge column 11 vía a transfer vessel 6.
The resulting emulsion is stable and very clear, having a polymer solids content of 20 %.
The samples contain 1 % by weight polymer solids Goodrite K-752 . The different samples are analyzed for copper.
For such embodiments, the concentration of crosslinker is about 2 % based on the percent polymer solids.
The polymer polyols should contain vinyl polymer solids having 50 % or more styrene-derived moeities.
The number of chain extender ends was measured to be 15 meq / Kg of polymer solids.
The SGO is typically around 30 wt % SGO polymer solids neutralized by ammonia in water.
Maleic Acid The above dope solution contains about 18 % cellulose polymer solids.
Several mucilages of each polymer ( 1 wt. % polymer solids in deionized water ) are prepared.
You'll also be interested in:
Examples of using Polymer
Show more
Injected polymer compound shell in three sizes
We seem to be a bit light in the polymer sciences
High resistance polymer flow indicator cover
Examples of using Solids
Show more
The solids feared our metamorphic abilities
A sieve separates solids from used liquids
Solids liable to become liquid during transport
