Examples of 'polymerization' in a sentence
Meaning of "polymerization"
Polymerization (noun) - The process of combining small molecules (monomers) to form a large molecule (polymer) through a chemical reaction
Show more definitions
- The chemical process, normally with the aid of a catalyst, to form a polymer by bonding together multiple identical units (monomers).
How to use "polymerization" in a sentence
Basic
Advanced
polymerization
It can react in cationic polymerization to polycyclohexene oxide.
The polymerization is unusual for a nylon polymer.
Photoinitiators for the polymerization of artificial resins.
Polymerization is customarily continued at the same temperature.
Emissions to atmosphere of polymerization products are minimized.
The polymerization products are obtained by using a catalyst.
Prepolymers did undergo polymerization already to some extent.
The polymerization may be a bulk or emulsion polymerization.
They are available prior to polymerization in a viscous solution.
The polymerization carried out is summarized below.
They allow a radical polymerization in aerated medium.
The polymerization catalyst used was trifluoromethanesulfonic acid.
The controlled radical polymerization is well known.
The polymerization is performed according to conventional procedures.
Process for preparing a polymerization inhibitor solution.
See also
This polymerization may be effected continuously or discontinuously.
The duration of the polymerization is one hour.
Their polymerization can be carried in situ or beforehand.
At least one radical polymerization control agent.
The polymerization reaction takes place conventionally.
Transport of materials capable of undergoing uncontrolled polymerization.
Here the polymerization is accelerated by the adjunction.
You are loading a chemical that is liable to polymerization.
Polyphosphates arise by polymerization of phosphoric acid derivatives.
Polymerization of unsaturated hydrocarbons with an induction period.
It is produced by a method called condensation polymerization or transesterification.
I thought the polymerization would be sterically hindered.
Nucleating factors are necessary to stimulate actin polymerization.
This involves polymerization of monomers emulsified in water.
This technique is also known as living polymerization.
Phase of polymerization of the material then follows.
These could be important in the polymerization process.
The polymerization is initiated by addition of a polymerization initiator.
Catalysts like zinc glutarate are used in polymerization.
The polymerization takes place in two hours.
It is a precursor to catalysts used for polymerization of alkynes.
The polymerization reaction requires a high temperature.
These activities largely depend on degree of polymerization.
The polymerization should preferably be realised in emulsion.
Hydrogels can be produced using emulsion polymerization.
The polymerization is carried out substantially in water.
This equilibrium determines the polymerization rate.
The polymerization is then initiated by adding catalysts.
Initiation is the first step in cationic polymerization.
The polymerization may be performed continuously or batchwise.
Molecular hybridization failed due to incomplete polymerization.
The polymerization of such monomers is known per se.
Lumefantrine interferes more in the polymerization processes.
The polymerization is continued for an additional hour.
There are two different types of reactions in polymerization.
