Examples of 'polymerization time' in a sentence
Meaning of "polymerization time"
polymerization time - This phrase is used in the context of chemistry, specifically in reference to the time it takes for a monomer to form a polymer. It represents the duration required for the formation of chemical bonds and the growth of the polymer chain
How to use "polymerization time" in a sentence
Basic
Advanced
polymerization time
The polymerization time is not also particularly restricted.
It is generally desired to shorten the total polymerization time.
Polymerization time also varies according to various factors.
This effect increases with increasing polymerization time.
The polymerization time was one hour.
This higher drop rate leads to a shorter polymerization time.
Polymerization time was normally one hour.
Accelerators and catalysts can greatly reduce the polymerization time.
Polymerization time depends on the number of active sites.
Molecular weight generally also increases in direct proportion to polymerization time.
Polymerization time is the same as the previous products.
It is therefore desired to determine an optimum polymerization time depending upon the conditions.
The polymerization time can be suitably selected to a particular application.
This setting time can correspond to the polymerization time of the glue.
The polymerization time is measured starting when the hydrogen is added.
See also
The polymerization temperature and the polymerization time may also be suitably adjusted.
The polymerization time varies by various factors as the polymerization temperature does.
The assembly is kept in the tool during the polymerization time of the glue.
The total polymerization time was varied to attain the target inherent viscosities.
Radiation curing can be performed at moderately elevated temperatures to further reduce polymerization time.
Maximum polymerization time.
The absorption characteristics of the polydiacetylene compound formed vary according to the polymerization time.
The polymerization time will be readily apparent to those skilled in the art.
The reaction conditions lead to a mixing time which is longer than the polymerization time.
The polymerization time is variable and depends on the composition of each of the phases.
Samples taken at different periods of solid state polymerization time were tested for IV.
The polymerization time is generally between a few minutes and a few tens of minutes.
Thus, the productivity is a surrogate for polymerization time.
The polymerization time can vary widely from a few minutes to some hours.
The synthesis will be stopped after an additional polymerization time of the order of 16 h.
Polymerization time is controlled by varying the ingredients necessary for the reaction to occur.
In slurry processes, the polymerization time can be regulated as desired.
The polymerization time also varies depending upon various factors similarly to the polymerization temperature.
Furthermore, the synthetic resin industry demands reduction of the polymerization time.
Further extension of the polymerization time lowers the polymerization degree on the contrary.
The linear velocity of the apparatus is adjusted to give a polymerization time of about 25 minutes.
A significant reduction in polymerization time was observed in both the agitator torque and speed traces.
The phosphorus compound sometimes reacts with these polycondensation catalysts, thus slightly lengthening the polymerization time.
The total polymerization time will depend upon the temperature and degree of polymerization.
The x-axis represents the ATRP polymerization time in hours.
After a suitable polymerization time had elapsed the tubes were frozen in liquid nitrogen and opened.
Polymerization was continued overnight and total Polymerization time was 22 hours.
The polymerization time T is expressed in minutes.
Important! It is necessary to read instructions to a product to learn about polymerization time.
The polymerization time is about 9 minutes.
Figure 5a and 5b show polymerization control by adjusting polymerization time.
In batch operations, the polymerization time of functionalized monomers can be varied as desired.
When 95 % of polymerization pressure was achieved, the measurement of polymerization time was started.
Like the temperature, the polymerization time varies depending upon various factors.
Polymerization time generally ranges from about 2 to about 8 hours.
You'll also be interested in:
Examples of using Time
Show more
Spent a lot of time with the ladies
Time and tide wait for no man
A woman needs time to think things over
Examples of using Polymerization
Show more
It can react in cationic polymerization to polycyclohexene oxide
The polymerization is unusual for a nylon polymer
Photoinitiators for the polymerization of artificial resins
