Examples of 'position and lock' in a sentence
Meaning of "position and lock"
position and lock: This phrase is commonly used in the context of securing something in place. It indicates the act of positioning an object or mechanism in a specific location and then locking it to ensure stability or security
How to use "position and lock" in a sentence
Basic
Advanced
position and lock
Position and lock it with the screw.
Adjust the guide to the required position and lock it in.
Place the cover in position and lock the safety catch.
Push the shoulder supports into the uppermost locking position and lock.
Hold the rail adjuster in position and lock the screw again.
Place the beam in either the horizontal or vertical position and lock into place.
Hold the track adjuster in position and lock the screw again.
Set the push / pull action to the centre position and lock.
Turn the motor to vertical position and lock it using the bevel latch and.
Bring the arm back to the central position and lock it.
Slide the element into its position and lock it with the lock button.
Afterwards, refit the shelves in the same position and lock them in.
Rotate table to the extreme left position and lock in place using miter lock knob.
Return the sharpener to its stored position and lock in place.
Return the magazine to the original position and lock it with the locking lever.
See also
Slide the carriage towards the blade into the end position and lock with the slide 8.
Rotate table to 0 position and lock in place.
Return the cover to the original position and lock it in place.
Bring the saw arm into the lower position and lock it with the interlock knob 23.
Turn the light switch into the position and lock the vehicle.
Swing the saw arm into the lower position and lock it with the interlock knob 23.
Move the Chuck to its uppermost position and lock in place.
Clean the cartridge, return to its original position and lock by turning clockwise.
Return the second-row seatback to its upright position and lock it after sliding it backward.
After drilling put the column back in the 90 position and lock it with the screw.
Lift openers to transport position and lock “ Openers ” valve.
Preferably, a three-point system is used to position and lock each cartridge 80 in an opening 98.
Move the table to the 31.62 right miter position and lock the table in position.
You'll also be interested in:
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
Examples of using Lock
Show more
Get this lock off the gate
Lock bowl onto base by turning clockwise
Document digital lock concerns and complaints
