Examples of 'position and turn' in a sentence
Meaning of "position and turn"
position and turn: Refers to adjusting one's body or alignment and changing direction or orientation
How to use "position and turn" in a sentence
Basic
Advanced
position and turn
Resign from your position and turn yourself in.
Position and turn you in bed and chairs.
Place handle in low position and turn cleaner over.
Put the cap in position and turn it clockwise to close the rinse aid dispenser.
Hold motion control lever in that position and turn engine.
Place lid in position and turn clockwise to lock into place.
Screw the inlet hose tightly into position and turn off the.
Place body in upright position and turn vacuum cleaner over to expose lower plate.
Then slide the reverse switch to the opposite position and turn fan on again.
Place handle in low position and turn cleaner over so bottom side is up.
Make sure the lock switch ( 6a ) is in the upper position and turn the length.
Place handle in down position and turn vacuum cleaner over to expose lower plate.
Rotate the weight stack cover to the unlocked position and turn over the mouse to.
Pull crown to “ Middle ” position and turn CLOCKWISE or COUNTERCLOCKWISE until correct date appears.
Raise the chimney to its highest position and turn the pump off.
See also
Place handle in upright position and turn vacuum over to expose lower plate.
Please return your seat backs to the upright position and turn off and stow your.
Align the arrow to unlock position and turn the bottle clockwise to lock.
To stop vacuuming, raise handle to the upright position and turn off power switch.
Remove the hook from the lock position and turn it a quarter in a clockwise direction.
Starting treatment, sit in a relaxed, upright position and turn the compressor “ oN ”.
Turn the filter to the OFF position and turn the valve to the CLOSED position.
PULL crown to “ middle ” position and turn.
Turn Shut-Off Valve to the ON position and turn the Thermostat to the desired temperature.
Push in the start knob from the ACC position and turn it to the OFF.
Insert the Hopper into position and turn the hopper dial clockwise 90 to lock.
Push the throttle stick to the lowest position and turn on the transmitter.
Pull crown to “ OUT ” position and turn CLOCKWISE until date changes.
Stop them when they are in the up position and turn off the contact.
Put the lower spray arm in position and turn the fixing screw clockwise.
Return the handle tube to the upright position and turn the steam mop ‘ OFF.
Fit the debris screen back into position and turn clockwise to lock it into position.
Return the locking nut to its installed position and turn it 1/8 turn clockwise.
Rotate the handle to the desired position and turn the handle grip clockwise to re-tighten.
Please return your seats to the upright position and turn off all electronic devices.
Place the spring ( 9 ) back in position and turn so that it covers the straight pin.
Place the handle in low position and turn the vacuum.
Place tank cap in proper position and turn to the right.
Put a lens on the mounting position and turn the lens clockwise.
Place the cassette tank in an upright position and turn the emptying spout upwards.
Move the toggle switch to the OFF position and turn off the ice machine.
Sit in a relaxed, upright position and turn the compressor on.
Replace the cushion to the original position and turn clock-wise until the cushion is locked.
Turn the valve to the ‘ BREW ' position and turn off the brewer.
Alpha, November, Romeo, remain in your position and turn off the engine.
You'll also be interested in:
Examples of using Turn
Show more
Persuade him to turn over a new leaf
Now turn around and meet him
The unit does not turn on when installed
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
