Examples of 'position of the lever' in a sentence
Meaning of "position of the lever"
position of the lever - refers to the specific location or setting of a lever in a mechanical device, often used to control a particular function
How to use "position of the lever" in a sentence
Basic
Advanced
position of the lever
Note the position of the lever on the nut.
Be sure the trigger is released when changing the position of the lever.
The second position of the lever is a stable position.
Have a tight grip on lift lever when changing position of the lever.
The natural position of the lever is thus the blocking position.
The screw located in the hole beneath the cap adjusts the position of the lever.
Position of the lever on a machine with the feed direction right to left.
The same measurement is repeated for a second position of the lever which is likewise predetermined.
This position of the lever 1 is said to be an idle position.
The selected RELEASE FX effect changes according to the position of the lever.
Re-adjust the position of the lever as necessary.
For example, the operation amount may be a position of the lever.
Optimizes the position of the lever to suit the rider 's needs.
As a result, the supplemental member may change the position of the lever.
The corresponding position of the lever is referred to as the “ release position ”.
See also
The voltage on the arm 56 is an indication of the position of the lever 26.
The position of the lever can varied to suit the operator 's size.
Screw A can be used to alter the home position of the lever see Adjustments.
Therein, the position of the lever is a measure of the force in the chain.
Screw B can be used to adjust the home position of the lever see Adjustments.
The position of the lever 5 after turning is shown in a broken line in Figure 1.
Moreover, this action itself depends on the position of the lever relative to the stop.
The ergonomically optimal position of the lever enables a lightning-fast switching while playing.
The module 4 comprises a blocking sensor 16 that is sensitive to the position of the lever 11.
Figure 2 shows schematically the normal position of the lever linkage for inclining the bobbin ;.
The switch 71 for obtaining the information concerning the " neutral " position of the lever 12.
Changing the position of the lever e . g.
Sensor 48 produces a signal at terminal 134 that indicates the actual instantaneous position of the lever 26.
In the operative position of the lever 7, it is possible to wire the socket 1.
In the illustrated center position of the lever 110, a zero speed is commanded.
In the rotational position of the lever 29 shown in Figure 6, the table clamp is fixed.
The electromagnet 70 fastens the position of the lever 24 and prevents it from moving.
You'll also be interested in:
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
