Examples of 'power nozzle' in a sentence
Meaning of "power nozzle"
power nozzle - a type of attachment or accessory that is used to increase the cleaning or spraying power of a device. This phrase is frequently used in the context of vacuum cleaners, pressure washers, or gardening equipment
How to use "power nozzle" in a sentence
Basic
Advanced
power nozzle
Power nozzle agitator brushroll will not run.
Insert extension wand into the motorized power nozzle.
The power nozzle has two working modes.
Never try to modify the power nozzle on your own.
The power nozzle can then be used again.
Electric shock could occur if power nozzle is used on wet surfaces.
Power nozzle contains electrical connections.
Read the additional instructions included with the power nozzle.
Cleaning the power nozzle certain models only.
Please read these operating instructions prior to use of the power nozzle.
Connect the power nozzle to the power outlet.
Always disconnect the power cord before cleaning the power nozzle.
Attach the power nozzle directly to the hose handle.
The switch in the electrifi ed hose handle will operate the Power Nozzle only.
Disconnect the power nozzle from the telescopic tube.
See also
Attaching the hose to the power nozzle NOTE.
Your new power nozzle is intended for household only.
Active brush edge cleaners are on both sides of the Power Nozzle.
Connecting power nozzle wand and electrified hose handle.
The switch actuator in the Rainbow handle must be actuated to operate the Power Nozzle.
Connect the power nozzle to the socket on the vacuum cleaner.
Always turn off appliance before connecting Power Nozzle.
Remove power nozzle from wand and attach wand to hose.
Do not use the Rainbow or Power Nozzle to unplug drains.
Remove power nozzle from wand and turn over to bottom.
Push the opposite end of Wand firmly into Power Nozzle.
Replace the power nozzle cover back onto the unit.
Contact your local Rainbow distributor for a new Power Nozzle belt.
The power nozzle starts operating when the vacuum cleaner is switched on.
Pressure setting Your power nozzle has two pressure modes.
The power nozzle can be wiped clean with a damp piece of cloth.
Place your foot on the Floor Power Nozzle and pull handle towards you.
The power nozzle is connected to the vacuum cleaner through an extension wand or a hose.
Attaching extension lance to the power nozzle Attaching short lance to the extension lance NOTE.
Periodically inspect ends of the hose hangers, wands, and the elbow or power nozzle.
Use the power nozzle for every type of dry floor cleaning.
Check the wand, hose and power nozzle for.
Connect the power nozzle cord to the connector on the hose handle.
The cleaner starts in the bare floor setting, with the power nozzle brushroll off.
Keep moving the power nozzle during operation to avoid quick wear.
With its separate motor and revolving brush, the Power Nozzle actually lifts your carpet.
Your power nozzle has several built in safeguards to protect components from overload damage.
Use the tapered nozzle of the power nozzle to, for example, vacuum between cushions.
Turn power nozzle over to top and open hinged nozzle cover to access brushroll.
When using the vacuum models with a power nozzle ~ Always turn off the vacuum.
Attach the power nozzle to the hose handle and connect it to the power outlet.
Working mode 1 Attaching short lance to the power nozzle NOTE.
And the Power nozzle is not a serviceable part.
Brushroll ON / OFF button will stop motorized power nozzle brushroll from spinning.
The Power Lux power nozzle is specially designed for textiles.
You'll also be interested in:
Examples of using Power
Show more
Power to provide everything you find outside
Have a remarkable power to heal old wounds
Power to make every inmate pay rent
Examples of using Nozzle
Show more
Replace nozzle and bring in tight to body
Attach the textile turbo nozzle to tubes
Each nozzle can be individually closed or calibrated
