Examples of 'programming step' in a sentence
Meaning of "programming step"
programming step - refers to a specific action or task carried out during the process of writing computer programs or software
How to use "programming step" in a sentence
Basic
Advanced
programming step
The programming step is completed.
Press the programming button to activate the programming step.
Repeat the process until the programming step is confirmed as correct.
The microprocessor will display the following programming step.
Advantageously the programming step is between thirty picoseconds and one nanosecond.
The microprocessor will show the next programming step.
Block A corresponds to a programming step of the desired operating mode.
Again to store and advance to the next programming step.
When sequence is complete, programming step is terminated by pressing once.
Thermostat designers went back to the drawing board and they focused on that programming step.
If a programming step is to remain unused, dashes are set in the item StA.
You will understand the concepts of programming step by step.
Each programming step has a 30 second time limit for completion after the function is initiated.
Press the Okay Key to select the desired programming step required.
In programming step 5.8, specify the phases in which the controls are activated.
See also
Therefore, it can not be programmed in this programming step.
The display will flash the first programming step in the Other Options sub-menu.
On record, multiple key presses were merged into a single programming step.
Program the values in accordance with programming step 9.2 Set the time of the third stage.
After 1 second the digit " 1 " will appear first programming step.
The programming step is eliminated if the articles 22 arrive pretagged at the library 10.
Selected by enabling automatic reclosing programming step 2, number not flashing.
STOP input In programming step 5.13, specify the phases in which the ATOP input is scanned.
Selected by enabling automatic reclosing programming step 2, number not fl ashing.
The system cuts out, if this action is programmed in programming step 1.7.
An example of implementation of the programming step is shown in FIG . 1B.
The stop after power failure option was set to YES in programming step 5.15.
Selected by disabling automatic reclosing programming step 2, number flashing.
Standby Program the values in accordance with programming step 12.2.
Selected by disabling automatic reclosing programming step 2, number fl ashing.
You'll also be interested in:
Examples of using Step
Show more
You are asking me to step into the spotlight
Now step away from the console
It was nevertheless a first step in efforts to combat impunity
Examples of using Programming
Show more
Convenient sequence programming with graphic symbols
Programming mode only for physical address
This is a simple programming system for recorders
