Examples of 'pulse current' in a sentence
Meaning of "pulse current"
pulse current - Refers to the flow or movement of electric current in pulses or varying intensities
How to use "pulse current" in a sentence
Basic
Advanced
pulse current
The pulse current is equal to the.
The energy in transit is controlled by measuring pulse current.
Pulse current of low frequency and low voltage.
Selection of base current and pulse current current regulation.
Pulse current increasing means electric arc can obtain.
Both measures advantageously prevent losses of the pulse current.
Average pulse current.
The detection of the osides is advantageously effected by an amperometric measure in pulse current.
These devices also aim at assessing the pulse current capabilities of silicon carbide thyristors.
Set the value for the Dynamics and Pulse current.
The pulse current characteristics can be as follows,.
Eliminate voltage delay and to increase the pulse current capability.
When pulsing, the pulse current can reach very high levels.
The current of the processing device 92 converts this pulse current in a more usable form.
Pulse current regulator to minimum, turning it anticlockwise to the end select empiric.
See also
Moreover, the application of pulse current improves the quality of the copper layer.
During high intensity interval 52 the current is raised to pulse current level IH.
Rent, continuous time of pulse current and base current and therefore the welding.
Current surge, peak or pulse current.
Also, doubling the pulse current will not cause the voltage rise to double.
The source 20 may be of the direct current source or pulse current source type.
Summary, Diagrams for constant pulse current with rectangular andsinusoidal wave forms were calculated.
Fig . 13 shows the temperature change at the valve sheet 3 during supplying the pulse current.
In particular embodiments, the pulse current is less than about 2 mA.
The pulse current level is shown as numeral 145.
The switching circuit 140 thus enables the pulse current to be flowed out of the battery.
Under these conditions, the mean current is only slightly less ( by 10 % ) than the pulse current.
In Fig . 3, the applied pulse current to the first heater is given as PI.
FIG . 17A illustrates a high frequency biased pulse current wave ;.
With the time 0, the pulse current PI is applied to the first discharge heater.
FIG . 17B illustrates a low frequency biased pulse current wave ;.
The preignition pulse current intensity i1, is lower and its duration t1, is prolonged.
In FIG . 5, the pulse current source 30 is constituted by a set of LC sections in parallel.
You'll also be interested in:
Examples of using Pulse
Show more
The pulse only lasts a couple of microseconds
I can not get a pulse on the doppler
His pulse and respiration are below normal
Examples of using Current
Show more
The current national legislation on adoptions states
To temporarily alter the current programmed temperature
Current prosecutions of the crime of abduction of minors
