Examples of 'pushrod' in a sentence
Meaning of "pushrod"
A pushrod is a mechanical device used to transmit motion or force within a machine or engine. It typically consists of a rod or column that moves in a linear motion to control other connected components
Show more definitions
- A rigid reciprocating rod that, by its movement, transmits force to actuate a mechanism.
- A rod in a piston engine that actuates rocker arms above the cylinder head.
- A rod in an internal gear hub that actuates the shifting mechanism.
- A rod used in the transmission of flight control inputs to an aircraft's control surfaces.
How to use "pushrod" in a sentence
Basic
Advanced
pushrod
Pull the pushrod to close the carburetor.
Thread the ends on the elevator pushrod.
Lamborghini introduces pushrod suspension to series production.
Attach the steering arm on the pushrod.
The elevator pushrod is assembled as shown in the photos.
Cut off the excess pushrod material.
Thread a nut and clevis on the elevator pushrod.
Slide the pushrod into the pushrod tube.
I doubt he has a clue what pushrod suspension is.
Direct the pushrod toward the throttle servo.
Install the remaining elevator pushrod at this time.
Slide the pushrod through the hole in the fi rewall.
Thread the ball ends on the throttle pushrod.
Slide the throttle pushrod tube into the fuselage.
Thread the ball end on the throttle pushrod.
See also
Reconnect your throttle pushrod to the throttle control arm.
Slide the connector over the pushrod wire.
Adjust the pushrod length to fully close the door.
Thread the nut and clevis on the pushrod.
Slide the pushrod wire through the pushrod connector.
I think maybe the pushrod failed.
Such a pushrod makes it possible to separate the two circuits.
Thread the clevis on the pushrod.
Fit the rudder pushrod onto the guide sleeves.
The first component may be a pushrod.
They are all pushrod engines.
The pushrod is connected to a linear measurement transducer such as a potentiometer.
Disconnect your throttle arm from the throttle pushrod.
Secure the pushrod guide with a socket head cap screw.
You will hear a click when the pushrod is seated.
Secure the brass pushrod connector to the throttle servo arm.
The dosing sleeve subassembly is movably mounted on the pushrod.
Use the screw to secure the pushrod wire in the connector.
It is the place where you often find the pushrod.
Install the reach adjust pushrod through the stop plate.
Pull the elastic band from the clevis up to the pushrod.
Connect the pushrod to the output arm of the elevator servo.
Trim as necessary to clear the steering and throttle pushrod tubes.
Attach the pushrod connector to the throttle servo arm as shown.
Connect and secure the elevator pushrod in the same way.
Remote controller for heavy construction machines with follower pushrod.
Each valve shutter is coaxial with the pushrod and actuated by it.
Make sure the pushrod can still move without any binding.
Measures the clearance between the lifter and the pushrod.
Howards brand are the only type of pushrod we use in our engines.
You can now mark the correct length of the pushrod.
Slide the elevator pushrod into the tube inside the fuselage.
Apply a drop of threadlock on the threads of the pushrod near each clevis.
Make certain all pushrod linkages are secure and free of play.
Refit the pushrod.
