Examples of 'pushrods' in a sentence
Meaning of "pushrods"
Pushrods are rods used in an engine to operate the valves
Show more definitions
- plural of pushrod
How to use "pushrods" in a sentence
Basic
Advanced
pushrods
Push the rudder pushrods through the.
Remove the clevises from the pushrods.
Note the absence of pushrods on the cylinders.
Screw the clevises onto the rudder pushrods.
Connect the pushrods to the servo output arms.
Prepare the two carbon pushrods as shown.
Controls via pushrods with automatic coupling during rigging.
Thread the clevis back onto the pushrods.
The pushrods are installed in the middle holes of the servo arms.
Both elevator and rudder were operated by bamboo pushrods.
These lightweight pushrods provide maximum durability and long life.
These cylinders advance and retract the pushrods.
Connect the pushrods to the servo output arms as shown in the drawings.
Slip the couplers on the free end of the pushrods.
Slide the longer pushrods into the tubes inside the fuselage.
See also
Requires use of hardened pushrods.
Connect the pushrods to the servos using the following linkage holes.
Carefully remove the pushrods.
Once the carbon pushrods are attached to the flaperon servos it s a lot easier.
The keys of the keyboard are connected by vertical pushrods to the escapements.
Connect the pushrods to the link horns and adjust them if necessary.
Alongside the cast barrel were plated tubes to cover the pushrods.
Connect the clevises on the pushrods to the holes in the horn lugs.
In the past the ports would twist around the pushrods.
Because they often require pushrods they are often called pushrod engines.
The servos must be in the appropriate position to attach to the corresponding pushrods.
The dampers were actuated via rockers by pushrods from the front uprights.
Has stock base circle that permits the use of stock pushrods.
The two tail pushrods must be prepared before the two servos are installed.
The main drive gear turns the eccentric shaft to oscillate the pushrods.
The aluminum body features brass pushrods and precision machined engine components.
Screw the clevises onto the threaded end of the elevator and rudder pushrods.
Route the pushrods through the articulated barrels mounted on the servo output levers.
Fit the retainer clips and push them onto the pushrods from the side.
The standard pushrods which are installed in the rotor head have proved excellent in practice.
Use the same procedure to open up the slots for the rudder and elevator pushrods.
The aileron pushrods are connected to the servo output arms using swivel pushrod connectors.
This can be monitored real time from the strain gauges off the suspension pushrods.
Slip the elevator pushrods into the fuselage through the outer sleeves and into the vacant.
Tighten the grubscrews in the Duo pushrod connector to clamp the pushrods.
Most adjustable pushrods for Shovelhead models are machined for this.
Is there any other marks on the pushrods besides paint?
Each of the pushrods has a hydraulic clearance taking-up device.
It had a single central camshaft and 2 valves per cylinder actuated by pushrods.
It 's an engine where pushrods activate the valve train.
Attach a threaded coupler and clevis to one end of each of the elevator pushrods 1.
Slip the pushrods through the cross-holes in the pushrod connectors.
A device for rejecting unopened packs, comprising a sensor, a pneumatically actuated piston and pushrods.
As the pushrods reverse, the cutting blades also reverse the direction of their rotation.
Fit the servo output arms as shown, and mark the correct length of the pushrods.
