Examples of 'rake surface' in a sentence
Meaning of "rake surface"
Rake surface: To remove debris and smooth out the surface using a rake, typically used in gardening or lawn maintenance
How to use "rake surface" in a sentence
Basic
Advanced
rake surface
The rake surface was grown at the end.
The first face can be a rake surface.
A rake surface is formed adjacent to at least one cutting edge portion.
The surface can be a rake surface.
The rake surface extends in an inward direction of the cutting insert.
The abrasion resistance of a tool depends on the rake surface.
A rake surface is formed adjacent to at least one of the cutting portions.
The original point of the coordinate exists on the rake surface.
A rake surface is formed adjacent to the at least one of the cutting edge portion.
Lower impurity concentration will heighten the abrasion resistance at the rake surface.
If desired the rake surface can be provided with suitable chip control elements.
X □ is an impurity concentration on the rake surface of a diamond plate.
The planar rake surface and the planar relief surface form an obtuse angle.
As a matter of course, impurity concentration is smaller near the rake surface in the embodiments.
Thus, the rake surface has high abrasion resistance.
See also
The x-axis and y-axis lie on the rake surface.
If desired, the rake surface extends in an inward direction of the cutting insert.
The impurity concentration must be less than 5 % at the rake surface.
More than 5 % of impurity concentration at the rake surface would deteriorate abrasion resistance devastatingly.
The rake surface 32 is generally tangentially directed, facing the direction of rotation B.
In our experience, either type of indented undulatory rake surface 34 is suitable.
Adjacent each rake surface is a chip gullet 34.
Then z = 0 means the rake surface.
The diamond near the rake surface ( 4 ) has lower impurity concentration.
The outer surface revealed outside is called a rake surface ( 4 ).
The rake surface is denoted by z = 0.
On the contrary the impurity concentration near the rake surface is preferably less than 1000ppm.
The rake surface 76 is associated with the second side surface 70.
The clamping recess 82 can not constitute, or function as, a rake surface.
The rake surface 30 may also be provided with a chip forming groove 72.
The cutting edge 30 is formed at an intersection of a rake surface 32 and a relief surface 34.
A primary rake surface 46 extends inwardly from each of the primary cutting edges 42.
The serrated peripheral surface 22 intersects the upper rake surface 46 at a serrated cutting edge 50.
Similarly, a secondary rake surface 48 extends inwardly from each of the secondary cutting edges 44.
Each insert cutting edge 30 is formed at the intersection of a rake surface 34 and a relief surface 36.
In this example, the rake surface 126 is a planar surface across its length.
Between the rake surface 60 and the projecting abutment member 28 there is a chip forming groove 62.
Blade bevel angle -- the angle the rake surface 78 defines with a perpendicular 54 to the blade body.
The first rake surface 18A can comprise a land 30 extending inwardly from the first cutting edge 26A.
In this example, face 32D is a rake surface and face 32E is a relief surface.
You'll also be interested in:
Examples of using Rake
Show more
I am about to rake you over the coals
Rake only in daylight or in good artificial light
I knew you for a rake and a rambler
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
