Examples of 'rake angle' in a sentence
Meaning of "rake angle"
Rake angle: the angle at which the cutting edge of a tool, such as a rake or saw, is inclined relative to the workpiece or material being cut
How to use "rake angle" in a sentence
Basic
Advanced
rake angle
Point geometry with rake angle correction.
Corresponds theoretically to the true rake angle.
The larger the rake angle the larger the trail.
Calculation of the perpendicular rake angle.
Rake angle of a windscreen.
Motorcyclists tend to speak of trail in relation to rake angle.
Seat back rake angle.
Example of a chopper with an unusually large rake angle.
It is this axial rake angle that is critical to the present invention.
Grains with zero or near zero rake angle increased.
Measurement of the rake angle is performed on an unladen tractor standing on level ground.
Motorcycle rake angle.
The rake angle is the angle between the vertical and the steering axis.
Effective rake angle.
Material removal rate does not depend on the rake angle.
See also
Observe the correct rake angle and minimum dimensions of the saw chain.
The windscreen must be mounted at the same rake angle as on the tractor.
Then adjust the rake angle and sharpen the teeth on the other side.
The windscreen shall be mounted at the same rake angle as on the vehicle.
A negative rake angle generates a lifting force which lifts the tool from the rock.
Peripheral rake angle.
Positive rake angle for good chip formation guarantees a smooth cut and low cutting forces.
Certain important parameters affecting this position include the rake angle and the trail.
This rake angle B is also measured in the aforementioned normal plane P n.
The individual cone shown located in portion II has a neutral rake angle.
If desired, the rake angle can be positive as shown or neutral.
Preferably, each blade may have a designated rake angle.
A neutral rake angle is preferred in moderate-rate material removal applications.
Figure 6 is a cross sectional view of an abrading tool offering a neutral rake angle to a workpiece ;.
The above-mentioned rake angle can be along the entire cutting edge.
A cutting insert according to claim 1, wherein said chip breaker has a positive rake angle.
A negative rake angle is preferred in abrasive applications with low-rate material removal.
It has a short cutting edge, positive rake angle and small included angle.
We can easily see that the RB7 is in fact running a high rake angle.
Here, supplementary explanation about the rake angle and an included angle will be added.
A positive rake angle Z is preferred in aggressive-rate material removal applications.
The bits have a rather small included angle, a sizeable positive rake angle and a small relief angle.
Cutting speed too low Rake angle too small Wrong cutting material Lack of cooling / lubrication.
The entire cutting edge 22 has a positive rake angle.
The rake angle of the seat backrest;.
This angular movement sets the rake angle of the tool 26.
The rake angle y, however, remains constant.
The end cutting edges 60 all have an equivalent axial rake angle.
The rake angle of the windscreen ;.
For this reason, the maximum total negative rake angle should be about 35 degrees.
Obviously, the cross-sectional configuration of the chip breaker 5 may have a negative rake angle.
Note that, on a bicycle, as rake angle increases, head angle decreases.
A cutting insert according to claim 27, wherein each of said chip breakers has a positive rake angle.
And, additionally, front rake angle and diameter can be checked and measured.
Each cutting edge 22 can end at a point spaced apart from the negative rake angle edge 28.
