Examples of 'refrigerant piping' in a sentence
Meaning of "refrigerant piping"
The phrase 'refrigerant piping' refers to the system of pipes or conduits used in refrigeration systems to transport refrigerant, a substance that undergoes phase changes to absorb and release heat for cooling purposes. It describes the network of pipes that connect various components of a refrigeration system, facilitating the circulation and transfer of refrigerant
How to use "refrigerant piping" in a sentence
Basic
Advanced
refrigerant piping
Refrigerant piping length and height difference.
Precautions when checking the refrigerant piping.
Refrigerant piping must be protected from physical damage.
Do not use the existing refrigerant piping.
Insulate the refrigerant piping correctly and separately.
Make sure to insulate all refrigerant piping.
To connect the refrigerant piping to the indoor unit.
Make sure there is no faulty refrigerant piping.
Keep refrigerant piping as short as possible.
Caution to be taken when brazing refrigerant piping.
Refrigerant piping and interunit wiring.
Precautions when connecting the refrigerant piping.
To connect the refrigerant piping to the outdoor unit.
Guidelines when connecting the refrigerant piping.
Request for refrigerant piping connection.
See also
Use the following materials for refrigerant piping.
The existing refrigerant piping requires a thorough cleaning.
Knockout for control wiring and refrigerant piping.
Insulate the refrigerant piping on the indoor unit as follows.
Flare the end of the site refrigerant piping.
Connect refrigerant piping to the unit using flare connections.
Connecting direction for refrigerant piping.
Make sure refrigerant piping installation complies with applicable legislation.
Do not use flux when brazing refrigerant piping.
Connect the refrigerant piping securely before running the compressor.
Take the following precautions on refrigerant piping into account.
The internal refrigerant piping is also omitted from the figure.
Flux has an extremely harmful influence on refrigerant piping systems.
Select a site where refrigerant piping can easily be led to the outside.
Place the drain hose below the refrigerant piping.
Insulate and fix the refrigerant piping and interconnection cable as follows.
External and internal installations are connected by means of refrigerant piping.
Connecting the refrigerant piping involves.
Perform a visual check on quality of residual oil in existing refrigerant piping.
Do not touch the compressor or refrigerant piping without wearing gloves.
To perform vacuum drying to remove all moisture in the refrigerant piping.
Do not touch any of the refrigerant piping during and after operation.
Check that wiring lines do not make contact with refrigerant piping.
Install control wiring and refrigerant piping within the same line.
The refrigerant piping and cooling unit are connected through a rotary joint.
Contaminants on the inside of the refrigerant piping may cause the refriger.
The second temperature sensor measures the temperature of the refrigerant piping.
These are arranged in a refrigerant piping to complete a main circuit for a refrigerating cycle.
Carry out insulation of both gas and liquid refrigerant piping securely.
Refrigerant piping and electric wiring can not be attached on the right side.
Pass the drain hose and the refrigerant piping to the wall.
Install the refrigerant piping for the indoor unit in accordance with the.
Do not touch any refrigerant which has leaked out of refrigerant piping connections.
The pipe thickness of the refrigerant piping should comply with applicable legislation.
Check and observe the presence of three conditions in the refrigerant piping works.
You'll also be interested in:
Examples of using Piping
Show more
Cut the piping hole sloped slightly
In case of bottom right or bottom left piping
Exposed piping beneath counters and sinks
Examples of using Refrigerant
Show more
If the refrigerant cylinder empties while charging
Do not discharge the refrigerant gas to the
Refrigerant leak or block in the refrigerant system
