Examples of 'release the lever' in a sentence
Meaning of "release the lever"
release the lever - to let go of or activate a mechanical device that controls a particular function or movement, often used in machinery or equipment operation
How to use "release the lever" in a sentence
Basic
Advanced
release the lever
Release the lever on its proper position.
Hold thread loosely and release the lever.
Release the lever to lock the position.
Pull the retaining clip to release the lever.
Release the lever to return to forward sewing.
Close the valve and release the lever.
Release the lever on the trigger gun.
The appliance will be standing if you release the lever.
Release the lever to stop the tines.
To obtain a broken line push and release the lever.
Release the lever to disengage clutch.
If you want to switch the engine off release the lever.
Release the lever to turn it off.
The lock must click into place after you release the lever.
Release the lever and let it lift up by itself.
See also
Hold the screen firmly in place while you release the lever on both sides.
Release the lever to grip the templet guide.
Place the lever quick coupler onto the valve and then release the lever.
Release the lever to connect the speaker cable.
To turn the tiller off, release the lever.
Release the lever to lock the seatback in position.
When the glass is full, release the lever.
Release the lever to lock the stand in place.
To engage the clutch, gradually release the lever.
Release the lever and push it slightly forwards or.
To turn the mower off, just release the lever.
Release the lever for roller brush drive.
Once the adjustment has been made, release the lever.
Release the lever towards deck.
Reclose the bleed-nipple and release the lever.
Release the lever to lock the seat in position.
When the desired angle is reached, release the lever.
Release the lever to lock the wheel firmly in place.
When you are in the desired position, release the lever.
Release the lever so that it locks in the new position.
When the wheel will not go on any farther, release the lever.
Release the lever to stop the tines from turning.
Wire into the hole, then release the lever to secure the connection.
Release the lever and pull thread away from you.
When the new degree scale is displayed, you may release the lever.
Then release the lever to lock in the transport position.
After filling the cup up to the level you want, release the lever.
Release the lever to move back up and remove the sheets.
Begin to lower the handle with your right hand, and then release the lever.
Release the lever when the desired height position is reached.
Hold the position of the machine, release the lever by pressing on the button H.
Release the lever and turn the safety guard until.
Once cutting is finished, release the lever 1.
Release the lever and the unit will lock into place.
When you have finishing mowing, release the lever 1.
You'll also be interested in:
Examples of using Release
Show more
Press again to release the hold state
Release buttons when the motor unit
Read the press release online here
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
