Examples of 'remove the nozzle' in a sentence
Meaning of "remove the nozzle"
remove the nozzle: To detach or take out the nozzle, typically referring to a device such as a hose or nozzle on a fuel pump
How to use "remove the nozzle" in a sentence
Basic
Advanced
remove the nozzle
Remove the nozzle from the spout.
Use a screwdriver to remove the nozzle cover.
Remove the nozzle in the reverse sequence.
We are going to remove the nozzle from the hose.
Remove the nozzle from the handle.
Rotate the wrench counterclockwise to remove the nozzle.
Remove the nozzle supports and clean them.
Use an adjustable wrench to loosen and remove the nozzle.
Remove the nozzle from the blower tube.
Use a Phillips screwdriver to remove the nozzle guard.
Remove the nozzle by turning counterclockwise.
Lock the trigger gun in an OFF position and remove the nozzle.
Remove the nozzle from the wand assembly.
If cleaning is needed, remove the nozzle.
Remove the nozzle from the spray wand.
See also
To clean the mini turbine nozzle, remove the nozzle cover.
Remove the nozzle by placing hand over nozzle then.
When fully inflated, remove the nozzle from the belt and enjoy.
Remove the nozzle from the pistol and was it accurately.
Remove the battery, then remove the nozzle and clear debris from the nozzle.
Remove the nozzle and check the nozzle connection.
If the problem persists, remove the nozzle and insert the hose into the drain.
Remove the nozzle and clean it thoroughly in warm water.
As shown below, retract the locking ring on the quick-connect fitting to remove the nozzle.
Remove the nozzle from the end of the telescopic tube.
Improper spray distribution usually means the nozzle is clogged, remove the nozzle and clean it.
Remove the nozzle and contact tip from the gun.
Handle and nozzle 1 Remove the nozzle from the handle.
Remove the nozzle from the steam tube by pulling it downwards.
H4 Press the nozzle release button, remove the nozzle and place it in the storage compartment.
Remove the nozzle from the gun and wash it separately.
Use a phillips screwdriver to remove the nozzle cover screw located behind the caster Diagram 2.
Remove the nozzle and contact tip from the welding torch.
First of all, remove the nozzle set.
Remove the nozzle by unscrewing it counter clockwise using a flat head screw driver or.
While pushing in, turn the tool clockwise ¼ turn, then pull outward to remove the nozzle.
Remove the nozzle orifice and completely submerge spray nozzle in a container of water.
The nozzle/mixing chamber is clogged, Unscrew and remove the nozzle head nut.
Remove the nozzle and put it back from where you have taken it.
Trigger gun while you remove the nozzle ( 2 ) with gun.
Remove the nozzle and contact tip from the end of the gun assembly.
Before proceeding, remove the nozzle and the contact tip from the torch.
Remove the nozzle and inspect for molten beads inside the nozzle and on the end.
For dry dirt and dust, remove the nozzle from the appliance and empty the tank.
Then remove the nozzle from your nostril and breathe out through your mouth.
Cleaning - Remove the nozzle and rinse with water.
Remove the nozzle after a few seconds and measure the pressure with the gauge again.
Lift up to remove the nozzle and set aside Fig.4.
Remove the nozzle from the gun by unscrewing it counter-clockwise.
Attempting to remove the nozzle when the 3Doodler PRO is cool will irreparably damage it.
You'll also be interested in:
Examples of using Remove
Show more
You agreed to remove two thousand troops
Remove the battery cover by sliding it downward
Never disable or remove the contact arm
Examples of using Nozzle
Show more
Replace nozzle and bring in tight to body
Attach the textile turbo nozzle to tubes
Each nozzle can be individually closed or calibrated
