Examples of 'repeat measurement' in a sentence
Meaning of "repeat measurement"
repeat measurement - refers to the act of taking a measurement again, typically to check for accuracy, verify results, or ensure consistency. It implies the need to perform the measurement process more than once
How to use "repeat measurement" in a sentence
Basic
Advanced
repeat measurement
Check the instructions and repeat measurement.
Repeat measurement holding the arm absolutely still.
Correct fault source and repeat measurement.
Even a repeat measurement can produce noticeable differences.
The greater the spread of repeat measurement.
Even a repeat measurement can produce considerable differences.
Check conditions and repeat measurement.
Repeat measurement keeping arm still.
Confirm elevation with a repeat measurement within one week.
Repeat measurement after waiting time.
Check the patient by palpation and then repeat measurement.
Repeat measurement facility allows detailed examination of damage sources.
After an interval of two minutes a repeat measurement can take place.
A repeat measurement was made and the results are shown in FIGs.
The scale is now ready for another measurement repeat measurement.
See also
Repeat measurement more slowly when moving up and down over the measurement area.
Too low or high position of wrist Repeat measurement with correct posture.
Repeat measurement recommended, holding the arm absolutely still.
Laser beam interrupted Repeat measurement.
Repeat measurement with at least 5 minutes ‘ relaxation before the next measurement.
Device shows no defect Repeat measurement.
The repeat measurement on Example 2 shows negligible difference on gain results.
Check seating of air connector, repeat measurement.
Repeat measurement as shown and described under « Measuring » or deactivate the position sensor.
Ensure cuff is correctly positioned ; repeat measurement.
Repeat measurement as shown and described under « Measuring » or deactivate the positioning system A.
Check position of air plug, repeat measurement.
The ( optional ) repeat measurement offers several predictable advantages,.
Check that air connector is correctly fitted, repeat measurement.
Check conditions and repeat measurement after 3 minutes.
Check that the air connector is fitted properly, repeat measurement.
Patients were instructed to return for repeat measurement including adverse events at 12 weeks.
Where more than one score was reported, the measurement was a repeat measurement.
Repeat measurement as described under « Taking a measurement ».
Have the patient not talk or move, and repeat measurement.
Refit device and repeat measurement as shown and described under « Measuring ».
Have the patient not move the arm or body, and repeat measurement.
Pressure remaining in cuff Repeat measurement only after 10 seconds.
Repeat measurement - Do not move arm - Do not talk.
If the values of the individual measurements do not match, a repeat measurement is carried out.
Repeat measurement after resting for 3-5 minutes.
If you have a high blood pressure reading, you should repeat measurement on two more occasions.
Repeat measurement after 3-5 minutes, with your wrist at heart level.
Person may just drink a cold beverage ; please repeat measurement in 15 minutes.
Please wait until the scaleshows 0.0 and repeat measurement.
Refit cuff tightly and correctly, relax and repeat measurement as shown in page 37.
Step off the scale, wait until the scale shows 0.0 and repeat measurement.
Measurement time > 3 min repeat measurement.
No valid pulse readings Check position of unit ( see page 50 ) and repeat measurement.
Activate scale, wait for " kg " to appear and repeat measurement.
You'll also be interested in:
Examples of using Measurement
Show more
Market risk measurement and limits in trading
Systolic or diastolic pressure was outside the measurement
Airflow measurement and revision of test standards
Examples of using Repeat
Show more
If not repeat the clean cycle procedure
There is no need for me to repeat their presentations
Repeat for the other leveling foot
