Examples of 'viscosity measurement' in a sentence
Meaning of "viscosity measurement"
viscosity measurement: This refers to the process of measuring the thickness or fluidity of a liquid, often used in scientific or industrial contexts
How to use "viscosity measurement" in a sentence
Basic
Advanced
viscosity measurement
The time value is based on a viscosity measurement.
The viscosity measurement is expressed in second.
They were subjected to viscosity measurement.
The viscosity measurement may be carried out as follows.
Another test procedure that is quite reliable is viscosity measurement.
The viscosity measurement is then obtained by means of a flowrate measurement.
The samples had been stored at room temperature prior to the viscosity measurement.
The viscosity measurement indicates the processability of the material.
No insoluble matter was observed in any of the solutions prepared for viscosity measurement.
The viscosity measurement is compared to the desired viscosity standard.
Due to the apparent high viscosity of the solution a viscosity measurement was not obtained.
Cps is the viscosity measurement unit for hydroxypropyl cellulose.
The degree of polymerization was estimated from gel permeation chromatography and intrinsic viscosity measurement.
Viscosity measurement systems are known to a person skilled in the art.
One type of commonly used viscosity measurement is inherent viscosity ninh.
See also
A viscosity measurement was not obtained.
All viscosities were measured with a Brookfield viscosity measurement device.
The viscosity measurement was developed and presented earlier.
At each target protein concentration a UV and viscosity measurement was performed.
The final viscosity measurement indicates the degree of cell restructuring.
The HPMC composition gelling temperature was determined by viscosity measurement by progressively heating the composition.
The viscosity measurement makes it possible to evaluate the consistency of the formulae produced.
So, the gel transition temperature was determined by viscosity measurement.
First step is a viscosity measurement beginning with the lowest apparent shear rate.
And it defined a new standard in on-line viscosity measurement.
That viscosity measurement is satisfactory for Newtonian liquids.
Parameters associated with the viscosity measurement are given below,.
Dynamic viscosity measurement is carried out for determining complex viscosity n *.
The operating protocol followed for the viscosity measurement was,.
This method of viscosity measurement is only suitable for Newtonian fluids.
No more epichlorohydrin was added, and samples were obtained for viscosity measurement.
The following viscosity measurement is used throughout the examples,.
After the lyophilized cakes were dissolved, the samples were ready for viscosity measurement.
The truncated viscosity measurement cone has the following dimensions,.
Multiple goViscs can be daisy-chained together to form a complete viscosity measurement environment.
Protocol, the viscosity measurement protocol is identical to that described above.
These signals are necessary in order for the head 2 to perform a simple viscosity measurement.
Viscosity measurement of cross-linked instant starch derivatives in deionized water.
According to the present invention, no viscosity measurement is necessary to control the system.
A new viscosity measurement of this same sol was performed after 12 months of aging.
Table 2 pulls together some popular viscosity measurement methods into one table.
The initial viscosity measurement is taken approximately 30 seconds after mixing is completed.
The composition is allowed to rest for 15 minutes before starting the viscosity measurement.
Furthermore, the viscosity measurement position is generally remote from the printing head.
Figure 2 is a sectional illustration of a Kohka-type flow tester used for melt viscosity measurement.
Reliable and rapid in-line viscosity measurement is a vital tool for continuous product control.
Operation Procedure A Ferranti-Shirley viscometer is used for the viscosity measurement.
EXAMPLES Example 1 - Viscosity measurement of a suspension of poractant alfa in a physiological saline aqueous solution.
The time between TiO2 addition and viscosity measurement was ca . 3 minutes.
Static viscosity measurement to simulate the conditions of a shut-in pipeline,.
You'll also be interested in:
Examples of using Measurement
Show more
Market risk measurement and limits in trading
Systolic or diastolic pressure was outside the measurement
Airflow measurement and revision of test standards
Examples of using Viscosity
Show more
High viscosity materials applied without problems
Effects of polysaccharides on viscosity in the rheology of foods
Its viscosity lets an unctuous consistency reappear
