Examples of 'residual moisture content' in a sentence
Meaning of "residual moisture content"
residual moisture content: This phrase refers to the amount of moisture or water that remains in a substance or material after the completion of a drying process. It is a term commonly used in industries such as agriculture, food production, or manufacturing to describe the level of residual dampness in a product or substance, which can affect its quality, stability, or shelf life
How to use "residual moisture content" in a sentence
Basic
Advanced
residual moisture content
The residual moisture content is checked by weight.
It must also have low residual moisture content.
The residual moisture content after baking is more than ca.
A composition having a low residual moisture content can be obtained.
Residual moisture content.
The fiber is then dried to a low residual moisture content.
Also the residual moisture content of the formulation depends on the requirements of the product.
This increase in particle size was due to a higher residual moisture content within the granules.
The residual moisture content of the dried pigment preparation obtained can vary significantly.
Equilibrium moisture content being the residual moisture content of a commercially available dry starch.
The residual moisture content was determined by the Karl Fischer titration method Angew.
Dried composition A composition having a low residual moisture content can be obtained.
The residual moisture content of specific lyophilized samples was determined by means of Karl-Fischer titration.
It is then followed by drying to produce a residual moisture content of about 3 %.
The residual moisture content is calculated by the following formula, EPMATHMARKEREP.
See also
The flotation tailings were dried to a residual moisture content of 2 wt. ft in a ring drier.
The residual moisture content is approximately 42 ppm.
The reaction product is then preferably dried to a residual moisture content of 2 % or less.
Results of residual moisture content and cake morphology are shown in Table 9.
In this way, a composition having a low residual moisture content can be obtained.
FIG . 5 is a residual moisture content ( RMC ) model calibration plot.
Ground only needs to be “ visually dry ”, no discussions about residual moisture content.
The film has a residual moisture content of 5 %.
These agglomerates are then dried so as to have a residual moisture content of less than 10 %.
The powder had residual moisture content in a concentration of 5 %.
The powder then arrived on the belt with a residual moisture content of 2 to 4 %.
There should only be residual moisture content of max . 25 % in the material to be ironed.
A rehydratable composition according to claim 20 which has a residual moisture content of not greater than 2 %.
In many cases, the residual moisture content is even less than 5 % by weight.
A powderous composition was obtained with a residual moisture content of 3.1 %.
The results show that the residual moisture content was varied from 1 % to 5 % for different formulations.
The biomass is dried in the dryer 3 until about 7-15 % residual moisture content remains in it.
This step achieves a residual moisture content inferior to 1 %.
Subsequent to washing, the material was partially redried to leave a residual moisture content of about 50-70 %.
More preferably, the residual moisture content is less than about 2 %.
In Example 7 the drying treatment was carried out to a residual moisture content of 5.2 %.
Moreover the carrier must have low residual moisture content ( low " free water " content ).
The finished powdery pigment preparation had a residual moisture content of 10 % by weight.
The dried extruded pellets have a residual moisture content generally ranging from 5.0 to 15 % by weight.
Preferably, the method produces a dried sample having a residual moisture content of less than about 4 %.
The puree is preferably dried to a residual moisture content of approximately 3-8 %.
After drying, the granules of microalgal biomass flour have a residual moisture content of between 3 % and 6 %.
For the 10 minute mix, the residual moisture content was within the 1 % limit.
Untreated sea salt still contains a residual moisture content of up to 5 % water.
All the flakes obtained have a residual moisture content of around 5 %.
A composition according to claim 1 having a residual moisture content of less than 8 % by weight.
The finished powdery pigment preparation had a residual moisture content of less than 10 % by weight.
The flakes thus prepared have a residual moisture content of 1.7 %.
The flakes thus produced have a residual moisture content of 3.9 %.
Drying the third resin layer to a residual moisture content of 3 % to 6 % ; and.
You'll also be interested in:
Examples of using Content
Show more
On the product content and environmental release
Content management interfaces for web systems
Adjusts style and content when necessary
Examples of using Residual
Show more
This is residual emotion from the stitch
A cooking zone stay hot residual heat
The existing residual heat is no longer displayed
Examples of using Moisture
Show more
There is excessive moisture in the discharge air
Moisture must not penetrate the unit
Shake and remove moisture before replacing
