Examples of 'resistance measurement' in a sentence
Meaning of "resistance measurement"
This phrase refers to the process of quantifying the opposition to the flow of electric current in a circuit. It involves measuring the resistance, which is the property of a material or component that impedes the movement of electrons. Resistance measurements are commonly performed in electrical and electronic engineering to assess the performance or characteristics of various devices or systems
How to use "resistance measurement" in a sentence
Basic
Advanced
resistance measurement
Static and dynamic resistance measurement on switchgear.
Resistance measurement with earthing on both sides.
All the selective earth resistance measurement methods.
Resistance measurement is often by alternating current excitation.
It thus is a pure resistance measurement amplifier.
Resistance measurement with temperature compensation.
Overview of the different earth resistance measurement methods.
Resistance measurement after saline atmosphere.
Two voltages are produced by the resistance measurement circuit.
Other resistance measurement architectures are possible.
Continuity between nodes is tested typically by resistance measurement.
Never carry out resistance measurement on a live circuit.
Real time monitoring of building deterioration by material resistance measurement.
Isolation resistance measurement method for vehicle based tests.
The dial gauge can be checked in resistance measurement mode.
See also
Insulation resistance measurement for a motor with slip rings.
This control group provided a baseline air resistance measurement.
Dynamic resistance measurement testing.
These two measurements may be averaged to obtain a single resistance measurement.
It is convenient to make a resistance measurement with the same connection.
The resistance measurement function is obtained by configuring the device as follows.
It was used to an antibiotic resistance measurement with mecA gene.
This measurement is less sensitive to temperature than the insulation resistance measurement.
Typical example of blocking resistance measurement results are reported below.
The impedance measurement can be both a capacitive measurement and a resistance measurement.
Insulation resistance measurement for one phase of the winding.
Positive pressure infusion system having downstream resistance measurement capability.
Insulation and resistance measurement provides information on the fault characteristics.
First category of these apparatus operates in accordance with the principle of resistance measurement.
Voltage present during a resistance measurement will cause inaccurate readings.
And that any associated capacitors are fully discharged before you make a resistance measurement.
The resistance measurement can be carried out in several ways as will be described below.
There are no accurate and convenient procedure for insulin resistance measurement available in clinical practice.
During a resistance measurement will cause inaccurate readings and could damage the meter.
The latter can be of the platinum wire type whose resistance measurement represents the temperature.
The insulation resistance measurement provides information about the humidity and dampness of the insulation.
Unplug the leads immediately and cut off the voltage before making the resistance measurement.
The resistance measurement means may pass resistance measurements of each wheel to the control module.
Preferred circuitry for sensitivity adjustments isolates those adjustments from effecting the resistance measurement circuitry.
The electrical tests include resistance measurement of the load break switch and integrated earthing switch.
Position the measurement function switch to resistance measurement Ohm.
Scratch resistance measurement was carried out using a BRAIVE sclerometer.
Set the rotary function switch to resistance measurement Ohm.
Isolation resistance measurement method for component based tests of a REESS.
Select manual range for Voltage and Resistance measurement.
Carrying out resistance measurement Use the multimeter to check the removed ignition coil.
De-energize circuit before taking resistance measurement.
Functions Resistance measurement on ohmic resistances.
Switch the selector of multi-meter to resistance measurement.
A resistance measurement with DC is not intended.
You'll also be interested in:
Examples of using Measurement
Show more
Market risk measurement and limits in trading
Systolic or diastolic pressure was outside the measurement
Airflow measurement and revision of test standards
Examples of using Resistance
Show more
National resistance to the occupation was therefore legitimate
This must result in a resistance value of approx
Resistance to surface damage by fine particles optional
