Examples of 'resistance measurements' in a sentence
Meaning of "resistance measurements"
resistance measurements: This phrase is commonly used in physics, engineering, and technical contexts to describe the process of quantifying the opposition to the flow of electric current or the transmission of heat through a material. Resistance measurements are crucial for assessing the efficiency, performance, and safety of electrical circuits, components, and systems
How to use "resistance measurements" in a sentence
Basic
Advanced
resistance measurements
Do not perform resistance measurements on live circuits.
And discharge all capacitors before taking any resistance measurements.
Never perform resistance measurements on live circuits.
There are several possible sources of measurement error associated with low resistance measurements.
Never make resistance measurements on a live circuit.
Ways to improve the reliability of earth resistance measurements were presented.
Small resistance measurements for better accuracy.
This is normal for high resistance measurements.
I took resistance measurements with machine on standby.
Before taking any resistance measurements.
Resistance measurements have demonstrated this property.
After two minutes the current and resistance measurements were observed and recorded.
Resistance measurements show that the electrodes are electrically conductive.
Erroneous measurements and damage to the meter can occur if resistance measurements are attempted.
Do not conduct resistance measurements on live circuits.
See also
A disposable cartridge is employed that includes a pair of electrodes across which resistance measurements are taken.
Three contact resistance measurements during indentation.
Curves from bending tests look similar to those of the crack resistance measurements shown above.
Never carry out resistance measurements on operating circuits.
A different basis length, however, may be chosen for making comparative resistance measurements.
Make sure resistance measurements are for only one cable at a time.
Specific precautions for earth resistance measurements 1.
Resistance measurements are normally taken to indicate the condition of a component or a circuit.
The resistance measurement means may pass resistance measurements of each wheel to the control module.
Resistance measurements are obtained during spontaneous ventilation and do not require any forced maneuvers.
Furthermore, rolling resistance measurements were carried out.
Resistance measurements are performed over 4 ranges.
Moreover, rolling resistance measurements were taken.
Resistance measurements are carried out visually between 2 and 3 weeks after sowing.
Additionally, visual inspections and resistance measurements were conducted.
Earth resistance measurements are often corrupted by the existence of ground currents and their harmonics.
The same way voltage, current or resistance measurements are recorded.
Never perform resistance measurements on a live circuit and make sure all capacitors are completely discharged.
Of course, this is not exclusive to resistance measurements and electrodes.
DC resistance measurements.
Hence, the invention enables effective resistance measurements to be made more selectively.
Winding resistance measurements in transformers are of fundamental importance for the following purposes,.
After six minutes of reaction time, the respective resistance measurements of the various strips were,.
Never perform resistance measurements on a live circuit and make sure all.
As an additional check, contactless electrical sheet resistance measurements were performed using a Nagy.
Condensation resistance measurements were made as discussed in Example I.
Furthermore, based on the condition of the CNT strength components differing resistance measurements are attained.
The results of the water resistance measurements are given in Table 6 below.
Electrochemical corrosion rate data ( EC ) are obtained during the test from potentiodynamic polarization resistance measurements.
The results of the traction resistance measurements are given in Table 1.
For resistance measurements above 1 MΩ, the meter needs a few seconds to stabilize the readout.
Geoelectric - Ground resistance measurements.
Electrical resistance measurements were performed with a Keithley multimeter 2000 at varying temperatures.
Follow steps 1 and 3 as for resistance measurements.
Notes, o Never perform resistance measurements on a live circuit and make sure all capacitors are.
You'll also be interested in:
Examples of using Measurements
Show more
All inch measurements are converted from millimeters
Do not perform capacitance measurements on live circuits
All measurements will be based on interior dimensions
Examples of using Resistance
Show more
National resistance to the occupation was therefore legitimate
This must result in a resistance value of approx
Resistance to surface damage by fine particles optional
