Examples of 'rolling temperature' in a sentence
Meaning of "rolling temperature"
rolling temperature: Term used in the context of metallurgy and material science to describe the temperature at which a controlled rolling process takes place
How to use "rolling temperature" in a sentence
Basic
Advanced
rolling temperature
The mcdel is verified by ccmparison with the end of rolling temperature.
Finally, the rolling temperature must be greater than the ambient temperature.
This may be possible carried out by controlling a rolling temperature and a redaction ratio.
The finish rolling temperature is controlled to Ar3 transformation point or greater.
In this event, they need to heat the ingots to rolling temperature.
The finish rolling temperature is therefore preferably the Ar3 transformation temperature or greater.
In industrial operation the scatterin strip thicknessand final rolling temperature was considerably re -.
The finishing rolling temperature is preferably set at the Ar3 transformation point or higher.
Performing hot rolling said semi-product up to an end rolling temperature to obtain a sheet.
Therefore, the final rolling temperature Tf is set so as to satisfy the following formula ( 2 ).
Within this range, R decrease keeps up with the rolling temperature increase.
The finishing rolling temperature was controlled to be approximately 900°C.
Figure48, Deviations from strip thickness and final rolling temperature.
Further, " FT " represents the finish rolling temperature ( or finishing temperature ).
In particular, Nb may raise the austenite no-recrystallization temperature ( Tnr ) to increases a rolling temperature.
See also
It is necessary to set the finish rolling temperature at 900°C or more.
When the rolling temperature is less than 800°C, possibility of decarburization is increased.
The lower limit of the finish rolling temperature is preferably 700°C.
Therefore, the rolling temperature in both of the last two stands is preferably 1000°C or less.
Note that an upper limit of the finish rolling temperature is desirably 1040°C.
Hence, the finish rolling temperature is preferably the Ar3 point or higher and higher than 820°C.
The billet was heated to normal rolling temperature of 1250°C in a conventional billet heating furnace.
The finishing rolling temperature was 870 ° C. The plates were air cooled after hot rolling.
Preferably, the end of rolling temperature Tfl is greater than or equal to 900 ° C.
Preferably, the end of rolling temperature T fl is greater than or equal to 900 ° C.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Rolling
Show more
Use caution when rolling on carpeted surfaces
Rolling on the floor laughing my ass off
We have a stretcher rolling out of the ambulance
