Examples of 'rotation of the shaft' in a sentence
Meaning of "rotation of the shaft"
Rotation of the shaft refers to the circular movement or spinning of a shaft, which is a long, slender, and cylindrical component used in various machines and mechanical systems. The rotation of the shaft is an essential function in many devices, such as engines, motors, turbines, and pumps, as it converts energy into motion or transmits power between different components
How to use "rotation of the shaft" in a sentence
Basic
Advanced
rotation of the shaft
Rotation of the shaft induces rotation of the cross shaft.
The mechanical energy is conveyed by the rotation of the shaft.
Rotation of the shaft causes axial movement of the housing.
Means is secured to the shaft to prevent rotation of the shaft.
This results in rotation of the shaft and the mixing element.
A magnet in the reservoir is movable in response to rotation of the shaft.
Rotation of the shaft is then used dispense the concentrated chemical.
Comparing said deduced speed with a speed of rotation of the shaft.
Rotation of the shaft can result in displacement of the pivot point.
The main journals define the axis of rotation of the shaft.
The rotation of the shaft results in an air flow through the engine.
This characteristic permits the rotation of the shaft train to be controlled precisely.
The stopping faces may be formed on the radius of rotation of the shaft.
An active trocar makes the rotation of the shaft with a free joint possible.
This relative displacement is measured during manual rotation of the shaft line.
This allows driving the rotation of the shaft at a desired slower rotation speed.
A transition box that allows you to change the rotation of the shaft.
The speed of rotation of the shaft train is low and constant during these phases.
The detection gear may rotate in accordance with the rotation of the shaft.
Under rotation of the shaft a waveform signal is produced with a periodically variable magnetic field.
The pneumatic actuator is integral with the shaft during rotation of the shaft.
As a result, rotation of the shaft also rotates the resistive and conductive members.
The fluid compression mechanism is configured to compress fluid with the rotation of the shaft.
No lubrication pump is needed, the rotation of the shaft itself is sufficient.
In complete alignment, the measured distance will be constant in rotation of the shaft.
Rotation of the shaft may be performed by any appropriate means, for example automatically e . g.
This condition is maintained during rotation of the shaft 4.
Thus, less than a one third rotation of the shaft is required to achieve a secure connection.
Thus, the electrovalve is stationary relative to the rotation of the shaft.
Rotation of the shaft in the opposite direction causes fluid to flow through a one-way valve.
Thus, effecting a telescopic movement of the housing causes rotation of the shaft.
If it is, it means that the rotation of the shaft 3 must be continued.
This air swirls inside the chamber as a result of the rotation of the shaft 5.
Rotation of the shaft 5 is effected using a motor 7 vÃa a universal joint 8.
The cooling oil is preferably injected according to the sense of rotation of the shaft 6.
The rotation of the shaft is controlled by the one handle 11.
The shaft 9 has a threaded portion so that rotation of the shaft results in a vertical movement.
Thus the rotation of the shaft 4 is transmitted to the beam 2.
Such a high ratio makes it necessary to exert a high torque for rotation of the shaft 5.
Block the rotation of the shaft with the hexagonal wrench 14.
The valve element is movable between these two positions by the rotation of the shaft 12.
Simple rotation of the shaft 3 then disengages the retracted arm 5.
The frequency of this motion is determined by the speed of rotation of the shaft A 1.
The rotation of the shaft 14 swings the shifters 3 as described above.
A slot 46 may be provided to inhibit rotation of the shaft.
Thus the rotation of the shaft 8 produces an axial movement of the sleeve 9.
This combined output is unaffected by rotation of the shaft 14.
For example, the rotation of the shaft 18 may be used to power an automobile.
The pressure ratios are adjusted by rotation of the shaft 54.
Rotation of the shaft 36 in a counter-clockwise direction causes closing of the power doors.
You'll also be interested in:
Examples of using Rotation
Show more
In left rotation the safety clutch is deactivated
I would estimate a half rotation before it is over
Its rotation is guided by the drive shaft
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
