Examples of 'rpm' in a sentence
Meaning of "rpm"
Abbreviation for revolutions per minute, a unit of frequency that represents the number of full rotations completed in one minute
Show more definitions
- Alternative letter-case form of RPM
- Abbreviation of revolutions per minute.
- RPM Package Manager, or formerly Red Hat Package Manager, a package management system used by some distributions of the Linux operating system – most importantly those by Red Hat.
How to use "rpm" in a sentence
Basic
Advanced
rpm
Rpm for high torque and speed.
Never exceed the rated rpm of tool.
A higher rpm means higher drive performance.
Input and output rotational speeds rpm.
The general form of an rpm install command is.
Speed at the input shaft of transmission rpm.
The general form of an rpm upgrade command is.
In the following examples the reference is in rpm.
Give me minimum rpm on both shafts.
Reduce the engine speed to idling rpm.
Rpm according to the telltale button.
Bring the engine to the maximum rpm.
Rpm of the accessory must exceed tool rpm.
The frequency is about several dozen rpm.
Engine rpm is set too low.
See also
This is hundreds of parts working at high rpm.
Reduce engine rpm before operating clutch operation.
Inch number of sides length rpm price.
Maximum engine rpm is recommended for smooth operation.
N is the rotation speed of the fan in rpm p.
Rpm or higher speed hard drive.
From low rpm to full throttle.
Rpm or rps flashes in the display as soon as useful.
Manual override rpm infeed conveyor.
Rpm pressings were red label.
Note the engine rpm and the speed.
Rpm cleaning shaft only at PESh.
With controllable high rpm dc needle wheel pump.
Rpm indicates the speed of the hard disk.
These operations must be performed only at low rpm.
With the engine at low rpm and blades.
Always start cutting the thread at low rpm.
Print the version of rpm being used.
Using the stroboscope to measure rpm.
It is healthier to control rpm at the source.
Possible values without additional gear speed rpm.
Reduce engine rpm before operating the side clutches.
Nominal speed at full load rpm.
Safety alert symbol rpm revolutions or reciprocations per minute.
Percentage of maximum torque at rpm stated.
The rotor rpm is dropping.
Speed at the input shaft rpm.
Operation at low rpm can lead to premature clutch failure.
Maximum tested input speed rpm.
Rpm revolutions per minute.
Motor only runs at maximum rpm.
Rpm maximum rated speed.
That explains that whining noise at low rpm.
The various engine rpm at any point on the track.
Gas turbine engines rotate at tens of thousands of rpm.
