Examples of 'rpm using' in a sentence
Meaning of "rpm using"
rpm using: This phrase is often used in the context of computing and technology to refer to the measurement of the speed of rotation of a computer's hard drive or a fan, measured in revolutions per minute
How to use "rpm using" in a sentence
Basic
Advanced
rpm using
If necessary, adjust the idling rpm using the idling adjustment screw.
Viscosity is in centipoises and determined with a Brookfield Viscometer at 1 rpm using a 1 spindle.
If necessary, adjust the idle rpm using the idle adjusting screw.
Subsequently, the cells are centrifuged on microscope slides for 1 min at 1200 rpm using a cytospin.
The materials are mixed at 60 rpm using the built in agitator / impeller.
The Ultraturrax disperser was removed and the emulsion was stirred at 100 rpm using a paddle stirrer.
The mixture was stirred at 300 rpm using a pitched paddle type impeller.
All components are weighed into a beaker and dispersed for 2 minutes at 1500 rpm using a simple stirrer.
This composition was stirred at 600 rpm using an electric hand whipper to obtain a whipping cream.
The resulting mixture was blended for 10 minutes at 46 rpm using a Turbula mixer.
This water was stirred to 350 rpm using a 4-blade paddle linked to a stirrer motor.
During this time the melt was actively stirred at about 80 rpm using an overhead stirrer.
The usual mixing rate was 600 rpm using a stainless steel stirring rod with ½ " diameter blades.
Garlic extract was mixed with soybean oil at 200 rpm using a propeller mixer.
The reaction mixture was stirred at 680 rpm using an overhead stirrer with a propeller stirring blade.
See also
The mixture is subsequently homogenised for 2 minutes at 9000 rpm using the Turrax.
The contents were stirred at about 100 rpm using a Heidolph stirrer ( Heidolph Elektro GmbH, Kelheim, Germany ).
Viscosity of each solution is measured at 25°C using a Brookfield viscometer set at 6 rpm using spindle 18.
The viscosity is measured at 50 rpm using a Brookfield viscometer.
These viscosities are measured on a Brookfield viscometer at 25°C and 20 rpm using an N4 spindle.
The mixture was stirred at 45 rpm using a rotor system.
The whole mixture was granulated at 150 rpm using the cutter.
Fruits were brushed for 3 min at 100 rpm using two cylindrical horsehair brushes.
The solution was homogenized for 2 minutes at high rpm using a hand held homogenizer.
The mixer blades were set to a speed of 53 rpm using a variable speed controller.
Concentrate was transferred to a microfuge tube and centrifuged at 14 000 rpm using a microfuge prior to analysis.
The viscometer is operated at 60 rpm using a number 2 spindle.
The spacecraft then spun itself up to 0.67 rpm using nitrogen jets.
Agitate the water at approximately 500 rpm using high shear mixer.
In one case, work was performed at about 500 rpm using oil as a cooling lubricant.
Agitate for 5 minutes at a rotor speed of 190 rpm using mixing blade paddles.
Agitate for 5 minutes at a rotor speed of 120 rpm using balloon whisk paddles.
The Brookfield was set at 20 rpm using spindle 3.
You'll also be interested in:
Examples of using Rpm
Show more
Rpm for high torque and speed
Never exceed the rated rpm of tool
A higher rpm means higher drive performance
Examples of using Using
Show more
Mash kidney beans using a potato masher
Log in using the default administrative account
Proportion of households using a clean water source
