Examples of 'sample is heated' in a sentence
Meaning of "sample is heated"
Sample is heated: Refers to the process of applying heat to a small portion or representative specimen of a material or substance for testing, analysis, or experimentation. Heating a sample can reveal its physical or chemical properties under different temperature conditions
How to use "sample is heated" in a sentence
Basic
Advanced
sample is heated
The sample is heated until it is fully melted.
One advantage of adding oil is that the sample is heated more evenly.
The sample is heated by heating the septum bottle.
A constant mass is obtained before HF desorbs when the sample is heated.
When the sample is heated the vapour pressure increases.
In order to rid the final product of excess water, the sample is heated.
Therefore the sample is heated by radiation emitted by the susceptor.
A method as claimed in claim 8, wherein the sample is heated for 10 seconds to 1 hour.
The sample is heated in a capillary tube inside a heated metal block.
The advantage, however, is that the sample is heated ( absorbs ) more uniformly along its height.
The sample is heated to the desired temperature for a desired time to provide a pyrolyzed product.
By Soxhlet extraction the test sample is heated and the chemical substances is trapped in.
The sample is heated and the temperature of the sample and test chamber continuously monitored.
During a second step, the sample is heated beyond the melting temperature.
A sample is heated in a sample tube, which is immersed in a liquid in a heat-bath.
See also
During the denaturation, a liquid sample is heated at approximately 94°C.
The cracked sample is heated on the surface by a heat flux modulated at the frequency f i.
A sample is heated with potassium bisulfate, and acrolein is released if the test is positive.
More specifically, the test sample is heated within a sealed chamber to evolve the volatile fluid.
The sample is heated by means of a power Variac connected to a programmer.
Consequently the sample is heated at a rate of 10°C/min, until complete melting.
Sample is heated to at least 10°C above the complete melting point and mixed thoroughly.
Subsequently the sample is heated at a rate of 10°C/min until complete melting.
The whole sample is heated uniformly at a given and constant heating rate in the instrument.
In the procedure, each sample is heated to 190°C in air and retained under isothermal conditions.
The sample is heated to denature the DNA and then cooled.
About 2 mg of sample is heated 5°/min in a loosely closed pan under nitrogen flow.
As a sample is heated through a temperature program, this damping is affected by the cure.
Preferably, the sample is heated to about 65°C, preferably for several hours.
Plastic. Sample is heated up under the nitrogen atmosphere, carbon black is obtained by pyrolysis.
When the sample is heated with the valve closed, the vapour pressure increases.
The powder sample is heated such that the sintering temperature is attained after 10 minutes.
The same sample is heated in O2 atmosphere until metal X has reacted completely.
The sample is heated at a programmed rate of 10 ° C / min to a temperature above its melting range.
The sample is heated for 48 hours at 40 c in a solution of pepsin hydrochloride.
The sample is heated above the polymer ( s ) crystalline melting point ( s ), under a weight load.
The sample is heated to approximately 75 °C with stirring.
Mg of a sample is heated at 10°C/min in a DSC measuring instrument.
The sample is heated to about 60 °C with stirring in 2mL of acetone.
The sample is heated to about 60 °C with stirring in 3mL of methanol.
For this test, a sample is heated to 150°C and equilibrated for 5 minutes at this temperature.
The sample is heated to 80 °C for 2 minutes and slowly cooled to room temperature over 30 minutes.
You'll also be interested in:
Examples of using Heated
Show more
There is a heated bed in the council office
Keep cord away from heated surfaces
Allow heated batteries to cool before charging
Examples of using Sample
Show more
Engineer training and sample terms of reference
Sample of sequence of targets for newspaper microfilming
Mfi particulate sample mass collected at mode i mg
