Examples of 'screw securely' in a sentence
Meaning of "screw securely"
Screw securely: To fasten an object firmly and tightly in place using a screw
How to use "screw securely" in a sentence
Basic
Advanced
screw securely
Fasten screw securely to fix rip fence.
Then tighten the clamp screw securely.
Tighten blade screw securely by turning counterclockwise.
Tighten the blade clamping screw securely.
Tighten blade screw securely by turning it clockwise with.
Tighten the needle clamp screw securely.
Tighten the wheel screw securely by turning it counterclockwise.
Be sure to tighten the screw securely.
Tighten the screw securely to lock the roller in place.
Tilt cover up and tighten screw securely to base.
Tighten blade screw securely by turning it clockwise with the blade wrench.
Tighten cable clip screw securely.
Tighten screw securely with a Phillips screwdriver.
Tighten cable connecting screw securely against clamp.
Reinstall the maintenance cover and tighten the maintenance cover screw securely.
See also
Tighten clamp screw securely if needed.
Install and tighten the drain screw securely.
Turn the safety screw securely for additional.
Tighten the air cleaner cover screw securely.
Tighten the Depth Adjustment Screw securely to lock in the required position.
Tighten the air fi lter cover screw securely.
Tighten blade screw securely by turning it counterclockwise with the hex “ T ” wrench.
Tighten the guard screw securely.
Tighten the screw securely and torque to 1.2 Nm minimum.
Use the screwdriver to tighten the screw securely.
Tighten thumb screw securely by hand.
Position the clamp and tighten the fixing screw securely.
Be sure to tighten the screw securely with the.
Use the oval screwdriver to tighten the presser foot holder screw securely.
Position blade and tighten the blade clamp screw securely using the T-handle hex key.
Reinstall the left side maintenance cover and tighten the cover screw securely.
Tilt cover ( B ) up and tighten screw securely to base.
Center and level the monitor panel then tighten each screw securely.
Tighten the RH socket headed screw securely.
Align the holes for the safety screw and fasten the screw securely.
Tighten the height-adjustment screw securely.
Slide the shoe to the desired position and tighten the thumb screw securely.
At the desired length, tighten the screw securely.
Position blade in the lower blade holder and tighten the blade clamp screw securely.
Use the hex key to tighten the blade screw securely.
Lift the tip of the guide bar and retighten the chain-sprocket-cover screw securely.
Using a hex key, tighten the hex set screw securely.
After all the fuel has drained into the container, tighten the drain screw securely.
Tighten the base-locking screw securely.
Replace the blade bolt cover and tighten blade bolt cover screw securely.
Put the washer back on the Allen screw and tighten the screw securely.
When thoroughly drained, retighten the drain screw securely.
After adjusting the clearance, tighten the screw securely.
After the proper adjustment, tighten the thumb screw securely.
After draining is completed, tighten the carburetor drain screw securely.
You'll also be interested in:
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
